Advertisement
BASIC
OPERATION
(FOR PLAYBACK
OF LASERVISION
DISCS AND COMPACT
DISCS)
BEFORE
BEGINNING
PLAYBACK,
BEWARE
OF
EXCESSIVE
INPUT.
A characteristic
of the digital sound
recorded
on
Compact
discs and LaserVision
with Digital Sound
Discs, is a very low noise level combined with a very
large dynamic range.
As a result, be extremely careful when playing back
these discs and adjust the sound volume properly in
order to prevent damage to your speakers from an
excessive input.
TO BEGIN PLAYBACK
[Preparations]
@ Turn on your television, and set it to a channel
(3 or 4) which is not being used for broad-
casting.
(When using a TV set with a video input ter-
minal, select video input.)
When using a TV monitor, switch on power to
the TV monitor.
@ Switch on power to your stereo system.
ABOUT THE SHAPE
OF THE DISC TABLE
The
CLD-901
can play 12-inch diameter LaserVision
Discs, 8-inch
diameter
LaserVision
Discs
and
Com-
pact Discs, so can play discs of three different sizes.
When
setting each size of disc, set the disc so that
the edge
is properly
aligned
with
the appropriate
guides shown in the figure.
12-inch
LaserVision
Disc
8-inch
LaserVision
Disc
1. Turn on the player.
mw The power (ON), LVP, LVP AUDIO MONITOR
(1/L, 2/R), and AUTO
DIGITAL indicators will
light.
The numeric display will show 0, and either the
LVP or the CDP indicator (depending on the
previously played disc) will light.
m The screen of the TV set or TV monitor will turn
blue, and
the
message
''LASERVISION"
or
"COMPACT DISC" will appear.
(This will be in
accordance with the previously played disc.)
| me |
LASERVISION
COMPACT
DISC
2. Press the EJECT button.
g The
door will open,
and
the disc table will
emerge
a specified distance.
The disc table
will not open or close if power is not turned on.
3. Pull out the disc table.
g Slowly pull out the disc table.
15
<VRB1001>
setae
ONT
= RS
EES
ET
ST EET
8 TI
EE
RETO
STEER
SESS
eS
FESS
EE
ES
SITS ED
FES
RSS
FS
TE
Zs
TS
SGT
ESS
oS
SS
ST
SATS
SEE
17 seers
ERISA
OTE
ST
TED
EE
ET
Advertisement
