Belkin Bitronics AutoSwitch Kit User Manual page 16

P73121/F1U126-KIT/EU/man.qxd
Windows
Change printer port from LPT1 to AutoSwitch port:
(Windows ® 95/98 only, for Windows NT
If one of the four devices being shared is a printer, you must follow the
procedure below to reconfigure the port connected to the printer. If none of
the devices are printers, then you can skip to page 17.
• Click on "Start", select "Settings", and double-click on "Printers".
• Right-click on the printer installed on the Bitronics switch, and click
on "Properties":
4/28/00 1:06 PM
95 / 98 and NT
®
® go to Page 15)
12
Page 12
®
(continued)