Table of Contents
Advertisement
7.1 Cleaning the detergent drawer
Take always care there are no detergent residues.
Clean the drawer regularly (Fig. 7-1):
1. Pull out the drawer until it stops.
2. Press the re lease button and remove the drawer.
3. Flush the drawer with water until it is clean and
insert the drawer back in the appliance.
7.2 Cleaning the machine
Unplug the machine during cleaning and mainte-
nance.
Use a soft cloth with soap liquid to clean the ma-
chine case (Fig. 7-2) and rubber components.
Do not use organic chemicals or corrosive sol-
vents.
7.3 Water inlet valve and inlet valve filter
To prevent blockage of water supply by solid subst-
ances like lime clean regularly the inlet valve filter.
Unplug the power cord and turn off the water
supply.
Unscrew the water inlet hose at the back of the
appliance as well as on the tap (Fig.7-3.1).
Remove the filters and flush them with water and
a brush (Fig.7-3.2).
Insert the filter and install the inlet hose.
7.4 Cleaning the drum
Remove accidentally washed metal parts such as
pins, coins, etc. from the drum (Fig. 7-4) because
they cause rust stains and damage.
Use a non-chloride cleaner for removing rust
stains. Observe the warning hints of the cleaning
agent manufacturer.
Do not use any hard objects or steel wool for clea-
ning.
Note: Hygiene
For regular maintenance we recommend to run programme
order to remove possible corruptive residues quarterly. Add a small amount of deterg-
ent in washing agent compartment (1) - or use a special machine cleaner.
7-Care and cleaning
1
2
7-3.1
with no load in
Drum Clean
7-1
7-2
7-3.2
7-4
18
Advertisement
Table of Contents
