Table of Contents
Advertisement
9-Installation
9-7.1
9-8
WARNING!
Ensure always that all connections (power supply, drainand fresh water hose)
are firm, dry and leak free!
Take care these parts are never to be crushed, kinked, or twisted.
If the supply cord is damaged, it must be replaced by the service agent (see war-
ranty card) in order to avoid a hazard.
Note: Drum Clean
After each installation or long periods of disuse, before first use and for regular main-
tenance run programme Drum Clean with no load and small amount of detergent in
s
hing agent compartment (1) or with special machine cleaner to remove possibly
u
ptive residues.
27
9.7 Fresh Water Connection
9-7.2
Make sure that the gaskets are inserted.
1. Connect the water inlet hose with the angled end
2. The other end connect to a water tap with a 3/4''
9.8 Electrical Connection
Before each connection check if:
Put the plug into the socket (Fig. 9-8).
to the appliance (Fig. 9-7.1). Tighten the screw
joint by hand.
thread (Fig. 9-7.2).
Power supply, socket and fusing are appropriate to
the rating plate.
The power socket is earthed and no multi-plug or
extension are used.
The power plug and socket are strictly according.
wa-
corr-
Advertisement
Table of Contents
