9-Care And Cleaning - Haier HW110-B14979S8EU1 User Manual

Hide thumbs

Table Of Contents

Table of Contents

9.1 Cleaning the detergent drawer

Take always care there are no detergent residues.

Clean the drawer regularly (Fig. 9-1):

1. Pull out the drawer until it stops.

2. Press the release button and remove the drawer.

3. Wipe the inside of the sink clean with a towel.

4. Flush the drawer with water until it is clean and

insert the drawer back in the appliance.

9.2 Cleaning the machine

Unplug the machine during cleaning and mainte-

nance.

Use a soft cloth with soap liquid to clean the ma-

chine case (Fig. 9-2) and rubber components.

Do not use organic chemicals or corrosive sol-

vents.

9.3 Water inlet valve and inlet valve ﬁ lter

To prevent blockage of water supply by solid substanc-

es like lime clean the inlet valve ﬁ lter.

Unplug the power cord and turn oﬀ the water supply.

Unscrew the water inlet hose on the tap (Fig. 9-3).

Flush the ﬁ lter with water and a brush (Fig. 9-4).

Insert the ﬁ lter and install the inlet hose.

Turn on the tap to see if it leaks.

9.4 Cleaning the drum

Remove accidentally washed items, especially

metal parts such as pins, coins, etc. from the drum

and the groove of the door gasket (rubber ring) be-

cause they cause rust stains and damage.

Use a non-chloride cleaner for removing rust

stains. Observe the warning hints of the cleaning

agent manufacturer.

Do not use any hard objects or steel wool for

cleaning.

After the procedure, open the door, use a towel to clean

the stains and foam around the gasket, and keep the

inside and outside of the gasket clean (Fig. 9-5).

Note: Hygiene

For regular maintenance, we recommend running the program "COTTON + 90°C +

600rpm" within 100 cycles to avoid possible corrosive residues. Add a small amount of

detergent to the detergent compartment (2) or use a special machine cleaner.