Table of Contents
Advertisement
1) Before wiring, always confirm the rated power voltage of the WGI-400A and terminal arrangement.
Then, conduct wiring in the correct manner.
2) Power consumption of the WGI-400A is maximum 6 VA. If it is unavoidably operated in
environment with poor power condition, it is recommended to use an insulated constant voltage
transformer or the like.
3) Special care should be taken when using the WGI-400A in environment with excessive vibration. If
the WGI-400A is operated at a location with excessive vibration or with continuous vibration, it
may cause measurement error and/or failure of the instrument.
Take care not to drop it during transportation and avoid applying strong impact.
Or, deterioration of the instrument may result.
4) Basically, the WGI-400A is designed to be used by connecting a strain gage transducer to the input
terminal. Do not use transducers other than the above or deterioration of the instrument may result.
5) Before cleaning the panel, always turn OFF the WGI-400A and gently clean with a soft cloth. Do
not use paint thinner, benzine, acetone, kerosene or the like.
6) Operate the WGI-400A by conforming to operating environment specified in this Instruction
Manual.
Or, malfunction and/or failure of the instrument may result.
CAUTION
3
Advertisement
Table of Contents
