Dell VERLAND TANDBERG Titan T2000 Owner's Manual page 125

Table 28. Event descriptions and recommended actions (continued)
Number Severity
Info.
584 Info.
585 Info.
586 Error
Info.
587 Info.
588 Info.
589 Info.
590 Error
124 Events and event messages
Description/Recommended actions
During the Failback Restore operation, the replication direction for a replication set was not
reversed due to a failure.
Recommended actions:
● If an issue with the peer connection was reported, check that appropriate interface cables
are connected to the host ports defined in the peer connection.
● If the appropriate cables are connected, check the cables and any network switches for
problems.
● Otherwise, check the peer connection for invalid configuration.
The replication direction for a replication set was reversed. Secondary is now primary. Primary is
now secondary.
During the Failback Restore operation, the replication direction for a replication set was
reversed.
Recommended actions:
● No action is required.
A peer connection was modified.
Recommended actions:
● No action is required.
A replication set was modified.
Recommended actions:
● No action is required.
Resuming the replication was unsuccessful due to the condition specified within the event.
Reasons for replication failure include but are not limited to shutdown of the secondary system,
a loss of communication across the peer connection (which may be due to CHAP configuration
changes), or a pool out-of-space condition.
Recommended actions:
● Resolve the issue specified by the error message included with this event.
A replication was resumed.
Recommended actions:
● No action is required.
A pending replication was removed from the queue.
Recommended actions:
● No action is required.
A replication set was failed over.
During the Failback Restore operation, a replication set was failed over
Recommended actions:
● No action is required.
A replication set completed the Failback No Restore operation or failed to complete the
Failback No Restore operation.
Recommended actions:
● No action is required.
A disk group has been quarantined.
This condition resulted from a controller flush/restore failure.
Recommended actions: