Toa WM-290 Operating Instructions

Toa WM-290 Operating Instructions

Toa wm-290 microphones: user guide

Advertisement

Quick Links

[Operating instructions]

WIRELESS
MICROPHONE
WM-290
WM-291
TOA Corporation
Please follow the instructions in this manual to obtain
the optimum results from this unit. We also recom-
mend you keep this manual handy for future refer-
ence.

GENERAL DESCRIPTION

The TOA WM-290 (WM-291) is a hand-held vocal
wireless microphone incorporating a Shure's SM58 in
its head, and a compressor/expander system noise
reduction circuit to minimize the influence of high-
frequency noise generated from digital equipment
such as personal computers and word processors.

FEATURES

Ideal for vocal applications.
Maximum input level of 144 dBspl.
Continuous operation for 12 hours or more on one
alkaline battery (LR6/1.5V).
Two battery indicators (green and red).
Internal LD. signal generator for tone squelch.
Stopper to prevent the fall of a battery case.
Compressor/expander system noise reduction cir-
cuit.

USER PRECAUTIONS

Take care not to drop the unit on to a hard floor.
Do not flip nor blow into the microphone head.
Avoid placing the unit in areas of extremely high
humidity and temperature.
Never open the unit nor touch its internal compo-
nents.
Clean the unit's exterior periodically with a soft dry
cloth. If it gets very dirty, wipe first with a soft damp
cloth lightly soaked in a neutral detergent, and then
dry with a soft cloth.
Never use thinner, benzine, or other solvents, which
may damage plastic part of the unit.
Remove the battery if the unit is to be stored for two
weeks or more.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WM-290 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Toa WM-290

  • Page 1: Operating Instructions

    GENERAL DESCRIPTION The TOA WM-290 (WM-291) is a hand-held vocal wireless microphone incorporating a Shure's SM58 in its head, and a compressor/expander system noise reduction circuit to minimize the influence of high- frequency noise generated from digital equipment such as personal computers and word processors.
  • Page 2: Battery Replacement

    BATTERY LOADING Use LR6 type alkaline battery. 1. Hold the microphone body and rotate the micro- phone grip anticlockwise. (Fig. 1) The microphone grip is so designed that it can not be completely removed from the body because the battery grip past the lock point as damage may occur.
  • Page 3 OFF. In rooms having a This causes The squelch circuit of TOA's wireless systems con- sists of both the tone and noise squelches, and is not actuated if only same RF carrier as the receiving frequency is received.
  • Page 4: Specifications

    Microphone holder Color identification labels Operating instructions • FCC license requirement The operation of the TOA wireless microphone sys- tems must conform with the rules and regulations contained in the code of Federal Regulations, 47, Telecommunications, Part 74 and Part 90.

This manual is also suitable for:

Wm-291

Table of Contents