Download
Share
Print this page
lamber S400-dy Instruction Manual
  1. Manuals
  2. Brands
  3. lamber Manuals
  4. Dishwasher
  5. S400-dy
  6. Instruction manual

lamber S400-dy Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
GLASSWASHER
S400-dy
S460-dy
S480-dy
INSTRUCTIONS MANUAL
R.00-JAN-2018

Advertisement

loading
Need help?

Need help?

Do you have a question about the S400-dy and is the answer not in the manual?

Questions and answers

Related Manuals for lamber S400-dy

Summary of Contents for lamber S400-dy

  • Page 1 GLASSWASHER S400-dy S460-dy S480-dy INSTRUCTIONS MANUAL R.00-JAN-2018...
  • Page 3 DECLARATION OF CONFORMITY The following : LAMBER S.R.L. – Via Italia 6 – 26855 Lodi Vecchio (LO) ITALY Declare under our responsibility that: Apparatus: PROFESSIONAL GLASSWASHER Trademark: LAMBER - Manufacturer : LAMBER S.R.L. Type / Model for which this declaration refers to the conformity of the following standards: ...
  • Page 4 The directive mentioned above, to which make reference for further details, provides for punitive actions in case of illegal disposal of such waste. Lamber guarantees a percentage of recovery at least of 90% in medium weight for each equipment. The 80% - always as regards the medium weight- of recovered material is recycled or reused.
  • Page 5 INDEX General notes pag. 06 Introduction and safety notes pag. 07 Learn to use the appliance pag. 08 First section - FOR THE USER pag. 09 Control panel pag. 10 Working and use pag. 11 Instructions before washing pag. 11 Washing pag.
  • Page 6 GENERAL NORMS Thank You for purchasing our Gasswashing Machine. Perfect washing-up results as far as hygiene concerns and a correct operation of the dishwashing machine can be assured only in case the instructions reported in the present manual are carefully followed. We hope the information reported in the present manual will be helpful to You.
  • Page 7 INTRODUCTION AND SAFETY NOTES INTRODUCTION - The machines are Industrial glass-washing machines . - Noise level of the machine: < 60dB(A) (Norms EN ISO 4871 and EN ISO 11204) PRELIMINARY OBSERVATION Carefully read the instructions reported in the present user manual, as it gives important indications about safety of installation, operation and maintenance: carefully keep the present manual for further consultations;...
  • Page 8 Pump filter rotating rinsing (90°) Overflow Stainless steel Lower rotating washing Tank Heating element Washing pump Stainless steel Boiler with insulation Tank drain Rinsing solenoid valve Body,tank and Top in Stainless steel construction Water inlet solenoid valve Rinse aid dispenser descr-s400-dy-2018...
  • Page 9 INSTRUCTIONS FOR THE USER...
  • Page 10 CONTROL PANEL Main switch Cycle Temperature pushbutton data display Interactive display Wash time selection pushbutton Programming pushbutton Dis.1 F92-display-2016...
  • Page 11 Regeneration and wall . a subsequent Resins’ Washing. You will see the serial number of the machine Attention: during tank filling don’t open the door followed by the logo Lamber. of the glasswasher ! Close the door of the glasswasher.

  • Page 12: Washing P1

    Attention! WASHING If during the loading phase, appears the message “BREAK TANK”, this means that you’re filling up Open the door of the machine and insert with water the rear Break Tank. the basket. . If after 5 minutes the data is still flashing in alternation with the inscription FILLING PHASE 1, N.b.The display informs you when the top of the you will see the word ALARM BEREAK TANK and...
  • Page 13 If you want to change the wash cycle, before closing the door, you will need to select the new cycle by pressing the time selection “D”. Temperature data display: to view temperature data during the wash cycle, it is necessary to press the push-button You will see the temperature data for 3”.
  • Page 14 “A” not operate the wash cycle while maintaining The logo Lamber will reappear and will then be able to active heating functions. start the function SELF-WASHING holding down the The display shows the word “ECONOMY”.
  • Page 15 The discharge stops automatically after about Then press the “E” button for 3 2’,20’’ minutes. seconds The discharge can be interrupted at any time by At the end of the descaling cycle (approx. 35 pressing the cycle-button “B” minutes) will appear on the LED the words After drainig, the machine will turn off “END OF THE DESCALING CYCLE”.
  • Page 16 WATER CHANGE (Attention! In case of machines with drain pump, there is no Overflow ! ); It’s possible to program after how many cycles we want to change water completely. The data will disappear automatically after 10 A number (for ex. 1/5 according to what you have seconds after you close the door of the set in the parameter) is displayed during the dishwasher.
  • Page 17 List ALARMS! TANK HEATING CHECK RINSE BREAK TANK ALARM ATTENTION: if the glasswasher is in the washing This indicates a fault in the operating system: phase (pump is functioning), the cycle will stop. lack of water mains, valve not functionning: Call Customer Service! Verify that there is no trace of detergent on the dishes before to use them.
  • Page 18 ! S400-dy Plates clearance S460-dy Plates clearance S480-dy To achieve optimal cleaning results, make sure that tableware is correctly stored...
  • Page 19 DAILY MAINTENANCE CLEANING PREVENTIVE MAINTENANCE Turn off the machine by pressing the switch “A” and drain the water from the PRECAUTION CLEANING tank by removing the overflow; INSTRUCTIONS (Attention! In case of machines with drain pump, there is no Overflow ! ); IMPORTANT : Before carrying out the cleaning maintenance...
  • Page 20 DAILY CLEANING OF THE INTERIOR OF THE GLASSWASHER Attention. Before carrying out cleaning the inside of the machine, make sure that there are no foreign objects that could damage the rusty steel inside the tank. The eventual rust particles could come from non- stainless steel dishes, from baskets or damaged water pipes not rust-proof.
  • Page 21 Clean the pump inlet filter by means of a brush Clean the washing arm for Clean the rinse arm any debris inside. Then, at the end oft he Clean the filter tank top Remove from the tank by cleaning, insert the pump means of a brush or cloth if filter.
  • Page 22 Replace the lower washing Replace the lower rinse arm ATTENTION! Daily disassemble the lower and upper wash arms working on the „big“ ring nut, like in the picture. Screw the upper rinse arm. Check that the wash and Completely close the door of rinse arms are free to rotate the dishwasher.
  • Page 23 DETERGENT and RINSE-AID Attention. During the use of chemicals is advisable to wear appropriate clothing, such as gloves and protectives glasses. It’s therefore important to consider some factors. Firsf of all, it is necessary to use only strongly anti-foaming Alkali and Chlore Products specific for industrial dishwasher, manufactured by Companies recognized as seriousness.

  • Page 24: Washing P1

    PROBLEMS - CAUSES - SOLUTIONS PROBLEMS CAUSES SOLUTIONS The machine doesn't catch Main switch is switched off; Turn ON the main switch; Power plug is not inserted Insert the power plug The water doesn't go in Water cock closed; Open water cock; The Overflow is not in place;...
  • Page 25 DESCALING When hard water is used you can find inside the machine and also on dishes calcareous sediments which must be removed both for hygienic and operating reasons by a descaling operation. Operating process and frequency of this intervention are suggested by your cleansing agent supplier who has suitable products, generally containing phosphoric acid.
  • Page 26 USEFUL HINTS FOR STAINLESS STEEL MAINTENANCE Stainless steel is so called because it is not affected by oxidation; this dues its resistance to a thin molecular layer of oxide on the surface which protects againts further oxidation. There are, however, substances which can modify or destroy this layer, giving rise to corrosion: besides preventing the protective film of oxide from reforming, these substances corrode the stainless steel itself and can cause irreparable damage.
  • Page 27 INSTRUCTIONS FOR THE INSTALLER The following instructions are addressed to a qualified personnel, the only one authorised to carry out checks and repair, if any. The Manufacturer declines any responsibility in the case of interventions made by a non qualified personnel.
  • Page 28 INSTALLATION S400-dy/S460-dy/S480-dy S400-dy=275 S460-dy=295 S480-dy=325 with drain pump Maximum height for drain to wall Water inlet 3/4" G 230 V 50Hz Electric input Drain 32 mm - 1"1/4 G Dis.2 Sca-S400-dy-DISPLAY-2018...
  • Page 29 Second Section - FOR THE INSTALLER During the installation, carry out a good machine levelling, which is a prerequisite for a correct operation. The Manufacturer cannot assume any responsability for any damage to persons or property deriving from the non-observance of the above-specified norms. For a correct installation see draw page 28.
  • Page 30 It is recommended to use only softeners to WATER CONNECTIONS “Ion Exchange” or “Reverse Osmosis”. The procedure based on magnetic field or Carefully comply with any national or electromagnetic radiation are completely regional regulations in force. useless for the specific use in dishsashers. Water installation must have the following DUCT: Provide to bring close to the characteristics:...
  • Page 31 2-4 g/liter. In any case it is however necessary that the detergent manufacturer If there is the detergent pump installed by regulates in an appropriate dosage depending on Lamber, data are as follows: the characteristics of the installation. Capacity: 1cc/SEC=3,6 Lit/H Voltage: 230/50-60Hz...
  • Page 32 DESCALING CYCLE : The suction tube of liquid detergent has to be passed through the opening spot on the bottom For programming, see section CONFIGURATION side of the machine (see next photo) USER TECHNICAL-PROGRAMMING The descaling cycle has a duration of about 35 minutes and takes place according to the steps listed below: 1.
  • Page 33 Check the inlet solenoid valve. List ALARMS! CHECK THE RINSE TANK HEATING BREAK TANK ALARM ATTENTION: if the dishwasher is in the washing It indicates an anomaly: lack of water from the phase (pump is functioning), the cycle will stop. net, solenoid valve not functioning.
  • Page 34 - You are recommended to proceed with the cleaning of the dosage hoses and the detergent pump with water once a month. Failure to comply with these guidelines will render this guarantee invalid. Lamber disclaims any liability for consequential damage on the product.
  • Page 35 KEYBOARD INTERACTIVE MEMBRANE REV16-2.47 Machine OFF ON/OFF push-button "A" for 1 second when the machine is ON (logo LAMBER appears) (with the machine empty the display will show off after 10" seconds) (just with machine full) Machine ON ON/OFF push-button "A" for 1 second when the machine is in OFF (Temperature displayed) with the machine empty the display will indicate "door open"...

  • Page 36: Table Of Contents

    USER TECHNICAL-CONFIGURATION PROGRAMMING "+" Push-button and push-button enter "D" for 5 second with the machine FF and hood open cod. PIN 1000 To view the Unit of measure °C temperatures during To confirm °F washing cycle press push-button Rinse After 3 seconds came back To modify (22÷90°C) standard...
  • Page 37 Partial cycles (number of partial performed cycles) n°…… (not editable) To confirm (Only be reset with Reset FunctionPartial Cycles) Total Cycles (Number of Cycles performed) n°…… (not editable) To confirm Partial Cycles Reset n°…… yes/no To confirm ("yes" to reset value) Automatic Starting To confirm Time phase 2...

  • Page 38: P1 P2 P3

    Aspirator To confirm With "NO" the aspirator time is enabled Time aspirator Aspirator To confirm (0÷60") Deter.pump with feeler To confirm If "YES" is activated, the adjustement of the detergent pump is excluded dos.Washing dos.washing To confirm Dosing time (0÷100%) dispenser of washing back back...
  • Page 39 Cycle number Number of cycles To confirm Attention: this parameter regeneration (0÷15") With "0" is available only on models the regenerating is LP6/8-dy e LP31/38-dy enabled Economy thermostat To confirm Thermocontrol To confirm Attention! BOILER When "Tank Thermocontrol" is active the function "Rinse Thermocontrol"...
  • Page 40 PCB-BOARD PRESET Please follow the instructions below for the PRESET (reset of the factory settings) of the PCB-board: When the machine is turned off, disconnect the wall switch. 2) Press at the same time the pushbuttons 1, as per picture on the side. PRESET DATI PRESET DATI COMPLETATO...
  • Page 41 CONNECTIONS SCHEME BOILER Elements Brown Blue Staples TANK Elements Brown Blue Colle-S400-dy-2018...
  • Page 46 COMPONENTS P.C.BOARD PCB2 CONTROL BOARD cod.0300842 MEMBRANE KEYBOARD YV1A BASE Cnp-F92-dy-display-2016...
  • Page 47 S400-dy S460-dy S480-dy SPECIFICATIONS 482x510x675 482x510x695 482x510x740 DIMENSIONS l x w x h WASHING CAPACITY pieces/H 60/30/20 60/30/20 60/30/20 baskets/H 60/120/180 60/120/180 60/120/180 Sec. WASH CYCLE 40 x 40 40 x 40 40 x 40 BASKET SIZE WORK HEIGHT CLEARANCE...

This manual is also suitable for:

S460-dyS480-dy