Bgm; Alarm/Time Information - Toa EXES-2000 Functions And Operating Instructions

17) BGM

This function requires No. 24 programming at the time of system
installation.
A maximum of 3 BGM channels is available to each station when
external BGM equipment are connected to the system.
Depress (channels No. 1 through No. 3), and selected BGM
is provided from each station. To cut BGM, dial
Note.
1) It is possible to make or receive a call even while the station
is used for BGM. In this event, BGM is automatically
disconnected.
2) Disconnected BGM is restored as soon as paging or call is
finished.
3) BGM channel may be selected regardless of whether all the
links are occupied.
18) Alarm and time information
Station No.24 programming has to be set up to register specific
stations for this function. When there is an alarm or time
information signal input in the exchange, an alarm or time
information signal is distributed from each such specific station,
overriding all other functions in operation including BGM
service. After the signal has been sent out, the BGM service is
resumed.
Note.
1) It is impossible to make or receive a call while this function is
being operated.
2) Use the external equipment for the activation input or each
signal.
– 25 –
BGM equipment 1
BGM equipment 2
BGM equipment 3