Using The Vlc Player - Foscam D4Z User Manual

You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port
number in your standard browser. For example, you would enter http:// 183.37.28.254:88

3.4 Using the VLC Player

This camera supports RTSP streaming, here you can view the camera using VLC player.
RTSP URL rtsp:// [user name][:password]@IP:port number/videosream
The part in the square brackets may be omitted.
user name & password :
The user name and password to access the camera. This part can be omitted.
IP: WAN or LAN IP address.
port number: If there is the RSTP port number on the Port page, you must only use RTSP port number.
otherwise, you must only use http port number.
Videostream: Here support two modes: videoMain and videoSub. When the network speed is bad, here
you had better select videoSub.
For example:
IP: 192.168.1.11
Port number: 88
User name: admin
Password: 123
Here I can enter one of the following URLs in the VLC.
1．rtsp://admin:123@192.168.1.11:88/videoMain
2．rtsp:// @192.168.1.11:88/videoMain
3．rtsp://:123@192.168.1.11:88/videoMain
4．rtsp://admin@192.168.1.11:88/videoMain
Open the VLC, and go to Media Open Network Stream option, then enter the URL into VLC.
12