Craftsman 315.220381 Owner's Manual page 59

PROBLEM CAUSE SOLUTION
Saw blade tends to push wood to 1. Blade is heeling. 1. See Squaring the Blade to the
one side when cross cutting. Fence in Adjustmentssection.
2. Column tube is loose in column 2. See Adjusting the Column
support. Tube in Assembly section.
3. Arm is loose or misaligned. 3. See Setting the Arm Lock
Wheel in the Assembly section.
4. Fence/tables are not straight. 4. Check with square; sand or
replace.
5. Blade or teeth are bent or dull. 5. Sharpen or replace the blade.
See the removal procedure in
Assembly section.
59 rRAFt'_;MAN" R ADIAL SAW315.220381