Intended Use - Haier HD80-A2939S User Manual

Heat-pump-dryer
Hide thumbs Also See for HD80-A2939S:
Table of Contents

Advertisement

3-Intended use

Intended use
This appliance is intended for drying items which have been washed in a water solution and
are marked on the manufacturer's care label as being suitable for tumble drying.
It is designed exclusively for domestic use inside the house. It is not intended for commer-
cial or industrial use. Changes or modifi cations to the device are not allowed. Unintended
use may cause hazards and loss of of all warranty and liability claims.
Standards and directives
This product meets the requirements of all applicable EC directives with the correspond-
ing harmonised standards, which provide for CE marking.
Notice
The appliance contains the fl uorinated greenhouse gas R134a (GWP:1430). This
gas is hermetically sealed.
Environmentally responsible use
Completely spin: Spin the laundry with the maximum spin speed.
Maximum load: Use the maximum fi lling amount according to the programme table,
but do not overload the dryer. To take advantage of the maximum load, the laundry
which should be dried "READY to wear", can be fi rst dried easily with "Ironing".
When program ends, remove the laundry which should be ironed and dry the
remaining laundry then to end.
Loosen up the laundry: Shake out the laundry before putting them into the dryer.
Avoid excess drying: An excessive drying should be avoided. Select the right pro-
gramme and the appropriate dry level.
Softener unnecessary: Do not use softener when washing, because the laundry will
become fl uff y and soft in the dryer .
Cleaning of the lint fi lters: Clean the lint fi lters after each cycle.
Ventilation: Make sure the appliance is properly ventilated (see INSTALLATION).
Condensed water reuse: The collected condensed water can be used for the steam
iron. Before that, it should be poured through a fi ne sieve or coff ee fi lter paper,
Smallest parts will be retained by the fi lter.
8
EN

Advertisement

Table of Contents
loading

Table of Contents