Panasonic KX-TCD735AXM Service Manual page 72

Address Default
0F06 28
0F07 3C
0F08 64
0F09 0A
0F0A 4A
0F0B 08
0F0C 14
0F0D 46
0F0E 28
0F0F 82
0F10 82
0F11 FF
0F12 64
0F13 08
Name
MakeTime
BreakTime
DtmfTime
InterDigitDtmfTime
InterDigitPulseTime
CalibBreakTime[0]
CalibBreakTime[1]
CalibBreakTime[2]
CalibBreakTime[3]
CalibBreakTime[4]
CalibBreakTime[5]
LineSeizureEndTime
RingTermToU100
RingPatternToU100
Type
D Pulse make time.
Unit : 1 ms. defaults to 40 ms.
D Pulse break time
Unit : 1 ms, defaults to 60 ms.
D DTMF tone pulse time.
Unit : 1 ms, defaults to 100 ms.
D Inter-digit time in DTMF mode.
Unit : 10 ms , defaults to 100ms.
D Inter-digit time in Pulse mode.
Unit : 10 ms, defaults to 740 ms.
D Calibrated loop-break time for short
Unit : 10 ms, defaults to 80 ms.
D Calibrated loop-break time for long
Unit : 10 ms, defaults to 200 ms.
D Calibrated loop-break time for extra
break
Unit : 10 ms, defaults to 700 ms.
D Calibrated earth-break time for short
Unit : 10 ms, defaults to 400 ms.
D Calibrated earth-break time for long
Unit : 10 ms, defaults to 1300 ms.
D Calibrated earth-break time for extra
break
Unit : 10 ms, defaults to 1300 ms.
D Line seizure end-time - time after hook
Meter-pulse detection continues during
period of time.
00h or FFh means 10 ms.
Unit : 10 ms, defaults to 10 ms.
D Ring terminate time-out period. This
max time that
must elapse between two ring-voltage
bursts before the
new ring-voltage is registered as a
incoming call.
Unit: 100 ms. defaults to approx 10
D Ring pattern timeout. Max. silence
during distinctive
ringing. As long as the silence period
not exceed this
period of time the ring is still considered
and counted as
one single ring.
Unit : 100 ms. Defaults to 800 ms
72
Description