LuxenHome WHF613 Instruction Manual

Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.

CARTON CONTENTS:

Description
Fountain Base
Fountain Basin
Fountain Top
Pump
Nuts
Compatible Pumps for this fountain:
Pump Model No.
JR450
JB450
YH707
Tools required for assembly: No tools required for assembly.

Assembly Instructions:

1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. Attach the larger fountain basin onto the fountain pedestal base, and turn clockwise to secure. Make sure it
is tightened and secure.
4. Feed the pump electrical cord into the opening of the larger fountain basin into the fountain pedestal base,
and guide it out through the bottom of the fountain pedestal.
5. Place the pump in the center of the large basin, and from the bottom of the second smaller basin, attach the
water supply tube to the pump outlet.
6. Attach the smaller basin to larger basin by aligning the bolts on the larger basin with the smaller basin's
openings on the side, and use nuts to secure the parts together. Do not overtighten the nuts to avoid
stripping.
7. Insert the fountain top into the second smaller fountain basin.
Resin 2-Tier Stone Finish Outdoor Fountain
WHF613
Quantity
1
2
1
1
2
Contact: cs@winsomehouse.com
Instruction Manual
SAVE THESE INSTRUCTIONS–This manual contains important
safety and operating instructions for power units.