Advertisement
Product Name:
SKU #:
Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from the packaging inside the carton to ensure there are no missing or damaged parts. Do not
attempt to assemble or use the product if any parts are missing or damaged.
CARTON CONTENTS:
Description
Fountain
Pump
Compatible Pumps for this fountain:
Pump Model No.
JR450/LED
JB450/LED
YH707/LED
Tools required for assembly: No tools are required for assembly.
Assembly Instructions:
1. Unpack the box's contents and check to ensure that all items are accounted for and in good condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. From the opening at the back of the fountain, insert the water supply tube into the pump outlet. Insert the
LED connector into the pump connector, and twist it to tighten. Place the pump inside the back of the
fountain, and draw the pump power cord out of the fountain's back.
4. Add clean water to the fountain (in the front). The water level should be approximately 30mm lower than
the basin's edge.
5. Connect the power cable to the outlet. If installed properly, water flow in the fountain will begin shortly.
6. Please do not use the electrical plug during wet weather conditions. Please note: On first use, there may be
air in the pump. It may take several minutes until all the air escapes.
7. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed where it
cannot be damaged or damage area if leaks exist.
8. Do not leave your fountain running for extended periods when no one is present to observe the
performance.
9. Check the area around your fountain on a regular basis to ensure that there is no leakage.
10. Please refresh the fountain with water each week to ensure it is in good condition.
11. Do not add harmful chemicals to the water, as it may alter the finish.
Brown Modern Sculpture Outdoor Water Fountain with Lights
WHF1023
Quantity
1
1
Instruction Manual
SAVE THESE INSTRUCTIONS–This manual contains important
safety and operating instructions for power units.
Advertisement
Table of Contents
Related Manuals for LuxenHome WHF1023
Summary of Contents for LuxenHome WHF1023
- Page 1 Product Name: Brown Modern Sculpture Outdoor Water Fountain with Lights SKU #: WHF1023 Thank you for purchasing this LuxenHöme product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
- Page 2 Instruction Manual SAVE THESE INSTRUCTIONS–This manual contains important safety and operating instructions for power units. Product Name: Brown Modern Sculpture Outdoor Water Fountain with Lights SKU #: WHF1023 Note: The above diagram is for illustrative purposes only.
- Page 3 Product Name: Brown Modern Sculpture Outdoor Water Fountain with Lights SKU #: WHF1023 MAINTENANCE OF YOUR PUMP: Keep the water clean – clean water will prolong the useful life of your pump. •...
- Page 4 Product Name: Brown Modern Sculpture Outdoor Water Fountain with Lights SKU #: WHF1023 Check the water level regularly to ensure the pump is completely submerged during operation. The pump • should be fully submerged during operation. Do not add water while operating the product. Always disconnect the pump from the power source before adding water.
Need help?
Do you have a question about the WHF1023 and is the answer not in the manual?
Questions and answers