LuxenHome WHF848 Instruction Manual

Product Name:
SKU #:
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.

CARTON CONTENTS:

Description
Fountain Top (Birdhouse)
Fountain Base
Bucket
Pump
Compatible Pumps for this fountain:
Pump Model No.
JR250/LED
JB333/LED
YH300-70/LED
YH-LV70T
Tools required for assembly: No tools required for assembly.

Assembly Instructions:

1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. Insert the water supply tube in the barrel into the pump outlet. Insert the LED connector to the pump
connector, and twist to tighten. Place the pump upright in the barrel and draw the pump power cord out of
the fountain back. Insert birdhouse on top of the fountain fence, and hang the bucket on the fountain. Place
fountain cover in the barrel covering the pump.
4. Add clean water to the fountain. The water level should be approximately 30mm lower than the edge of the
basin.
5. Connect the power cable to outlet. If installed properly, water flow in the fountain will begin shortly.
6. Please do not use the electrical plug in wet weather conditions. Please note: On first use, there may be air in
the pump. It may take several minutes until all the air escapes.
7. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
Polyresin Rustic Bird House and Barrel Patio Fountain with LED Light
WHF848
Quantity
1
1
1
1
Contact: sales@winsomehouse.com
Instruction Manual
Please save this manual for future reference.