LuxenHome WHF718 Instruction Manual

LuxenHome WHF718 Instruction Manual

Resin angel outdoor patio fountain

Advertisement

Product Name:
Resin Angel Outdoor Patio Fountain
SKU #:
WHF718
Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest
standards of safety and quality.
PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
Unpack all parts from Styrofoam and bubble wrap inside the carton to ensure there are no missing or damaged
parts. If any parts are missing or damaged, do not attempt to assemble or use the product.

CARTON CONTENTS:

Description
Fountain Base
Pump
Fountain Bowl
Angel and Pot
Compatible Pumps for this fountain:
Pump Model No.
JR250
JB333
YH-300-70
Tools required for assembly: No tools required for assembly.

Assembly Instructions:

1. Unpack the contents of the box and check to make sure that all items are accounted for and in good
condition.
2. Select a flat, level surface for the assembly and final location of your fountain.
3. Place the fountain on a flat, level surface. From the opening at the back of the fountain base and bowl,
insert the water supply tube into the pump outlet. Place the pump upright in the basin and draw the pump
power cord out of the fountain back. (①)
4. Add clean water into the basin. The water level should be approximately 1.18in (30mm) lower than the edge
of the basin. The pump will be submerged in the water. (②)
5. Connect the pump power cord to a ground fault circuit interrupter (GFCI) outlet and the product will begin
to function as intended. (③)
6. To eliminate the possibility of water damage around your fountain, check for leaks and excessive splashing
after the initial setup of your fountain. It is highly recommended that this fountain be placed in an area
where it cannot be damaged.
7. Do not leave your fountain running for extended periods of time when no one is present to observe the
performance.
8. Check the area around your fountain on a regular basis to ensure that there is no leakage.
9. Please refresh the fountain with water each week to ensure it in good condition.
10. Do not add any harmful chemicals to the water as it may alter the paint finish.
Quantity
1
1
1
1
Contact: sales@winsomehouse.com
Please save this manual for future reference.
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WHF718 and is the answer not in the manual?

Questions and answers

Summary of Contents for LuxenHome WHF718

  • Page 1 Please save this manual for future reference. Product Name: Resin Angel Outdoor Patio Fountain SKU #: WHF718 Thank you for purchasing this Luxen Home product. This product has been manufactured with the highest standards of safety and quality. PLEASE READ ALL INSTRUCTIONS BEFORE ASSEMBLY.
  • Page 2 Instruction Manual Please save this manual for future reference. Product Name: Resin Angel Outdoor Patio Fountain SKU #: WHF718 Note: The above diagram is for illustrative purposes only. Contact: sales@winsomehouse.com...
  • Page 3 Instruction Manual Please save this manual for future reference. Product Name: Resin Angel Outdoor Patio Fountain SKU #: WHF718 Pump Instructions: Special Warnings and Cautions: CAUTION: The pump has been evaluated for use with water only. • • Risk of electric shock. Do not remove cord and strain relief. Do not connect conduit to pump.
  • Page 4 Product Name: Resin Angel Outdoor Patio Fountain SKU #: WHF718 2. To reduce the risk of electric shock, use only on portable self-contained fountains no larger than 5 feet in any dimension. 3. Do not exceed the voltage shown on the pump.
  • Page 5 Please save this manual for future reference. Product Name: Resin Angel Outdoor Patio Fountain SKU #: WHF718 CARE & MAINTENANCE: 1. Keep the water clean – clean water will prolong the useful life of your pump. 2. Use a pre-filter on your pump if available.

Table of Contents