Parameter Setting Block Via Password; Table 13: Status Bar Indications - DAB PUMPS MCE-22/P Instruction For Installation And Maintenance

Identifier
GO Electric pump ON
SB Electric pump OFF
FAULT Presence of error that prevents control of the electric pump
The following can be shown on parameter display pages: numerical values and unit of measurement of current item, values of other
parameters related to setting of current item, graphic bar, lists; see Figure 14.
3.4

Parameter setting block via Password

The inverter is equipped with a password protection system. If a password is set, the inverter parameters will be accessible and
readable, but no modifications are admitted.
The password management system is located in the menu "technical assistance" and is managed by means of parameter PW, see
paragrap 6.6.16.
ENGLISH
Status bar indications at the bottom of each page
Table 15: Status bar indications
89
Description