Advertisement
Programming
5. Then use the
or
for that day's OCCUPIED period.
6. Press Next.
7. Repeat steps 4 through 6 for
time period.
Repeat steps 4 through 6 for the remaining days of the week.
A Note About Programmable Fan:
The programmable fan feature will run the fan continuously during
during any time period when it is programmed to be on. This is the best
way to keep the air circulated and to eliminate hot and cold spots in your
building. If using IAQ mode, set fan to IAQ for any time period.
Keypad Lockout Note:
If
appears in the display, then the keypad is locked. All or some
of the keys will not work. Hold the
remove the lock. Use the same procedure to lock the display
key to make your setpoint selection
UNOCCUPIED
that day's
and
keys for 3 seconds to
Temporary & Permanent Hold Feature
Temporary Hold: The thermostat will display HOLD and Run Sched-
ule on the bottom of the screen when you press the
key. If you do nothing, the temperature will remain at this setpoint
temporarily for 4 hours. The program setpoint will then replace the
temporary setpoint.
Permanent Hold: With a temporary hold set, If you press the Hold
key at the bottom of your screen, you will see Hold appear next to
the setpoint temperature in the display. The thermostat will now
permanently stay at this setpoint and can be adjusted using the
or
keys.
To Return To Program: Press the Run Schedule key at the bottom of
the screen to exit temporary and permanent holds.
Features
or
Advertisement
