Advertisement
Programming
Set Program Schedule For Two Time Periods
To customize your 5+1+1 Program schedule, follow these steps:
Weekday:
1. Select HEAT or COOL with the SYSTEM key.
Note: You have to program heat and cool each separately.
2. Press the Menu button (If menu does not appear first, press
Run Schedule).
3. Press Set Schedule. Note: Monday-Friday is displayed and the
OCCUPIED text is shown. You are now programming the
OCCUPIED time period for the weekday setting.
4. Use the
or
key to make your time
selection for the weekday OCCUPIED time period.
Note: If you want the fan to run continuously during this time
period, select On with the FAN key. If you want to use IAQ
mode during this time period, select IAQ with the fan key.
5. Then use the
or
the weekday OCCUPIED period.
6. Press Next.
7. Repeat steps 4 through 6 for the weekday UNOCCUPIED
time period.
Continued on next page...
(OCCUPIED, UNOCCUPIED)
key to make your setpoint selection for
Saturday:
Repeat steps 4 through 6 for the Saturday OCCUPIED time period
and for the Saturday UNOCCUPIED time period.
Sunday:
Repeat steps 4 through 6 for the Sunday OCCUPIED time period, and
for the Sunday UNOCCUPIED time period.
To customize your 7 day program schedule, follow these steps:
Monday:
1. Select HEAT or COOL with the SYSTEM key.
Note: You have to program heat and cool each seperately.
2. Press the Menu button (If menu does not appear first press
Run Schedule).
3. Press Set Schedule. Note: Monday is displayed and the
OCCUPIED text is shown. You are now programming the
OCCUPIED time period for that day.
4. Use the
or
key to make your time
selection for that day's OCCUPIED time period.
Note: If you want the fan to run continuously during this time
period, select On with the FAN key. If you want to use IAQ
mode during this time period, select IAQ with the fan key.
Continued on next page...
Programming
Advertisement
