Advertisement
Programming
Set Time
Follow the steps below to set the day of the week and current time:
1. Press the Menu button.
2. Press Set time.
3. Day of the week is flashing. Use the
select the current day of the week.
4. Press Next.
5. The current hour is flashing. Use the
select the current hour. When using 12-hour time, make sure
the correct a.m. or p.m. choice is selected.
6. Press Next.
7. Minutes are now flashing. Use the
select current minutes.
8. Press Done when completed.
Important:
You will see a Technician Setup option after the Menu key is
pressed. This Technician Setup key is for installer configuration
and should NOT be changed unless you consult your professional
heating and air conditioning technician.
or
key to
or
key to
or
key to
Set Program Schedule For Four Time Periods
(WAKE, LEAVE, RETURN, SLEEP or OCCUPIED 1, UNOCCUPIED1, OCCUPIED 2, UNOCCUPIED 2)
To customize your 5+1+1 Program schedule, follow these steps:
Weekday:
1. Select HEAT or COOL with the system key.
Note: You have to program heat and cool each separately.
2. Press the Menu button (If menu does not appear first press
Run Schedule).
3. Press Set Schedule. Note: Monday-Friday is displayed and the
WAKE/OCC1 icon is shown. You are now programming the
WAKE/OCC1 time period for the weekday setting.
4. Use the
or
key to make your time
selection for the weekday WAKE/OCC1 time period.
Note: If you want the fan to run continuously during this time
period, select On with the FAN key.
mode during this time period, select IAQ with the fan key.
5. Then use the
or
the weekday WAKE/OCC1period.
6. Press Next.
7. Repeat steps 4 through 6 for the weekday LEAVE/UNOCC1
time period, for the weekday RETURN/OCC2 time period,
and for the weekday SLEEP/UNOCC2 time period.
Programming
If you want to use IAQ
key to make your setpoint selection for
Advertisement
