Advertisement
Programming
Saturday:
Repeat steps 4 through 7 for the Saturday WAKE/OCC1 time period,
LEAVE/UNOCC1 time period, RETURN/OCC2 time period, and for
the Saturday SLEEP/UNOCC2 time period.
Sunday:
Repeat steps 4 through 7 for the Sunday WAKE/OCC1 time period,
LEAVE/UNOCC1 time period, RETURN/OCC2 time period, and for
the Sunday SLEEP/UNOCC2 time period.
To customize your 7 day Program Schedule, repeat
steps 4 through 8 for the Tuesday, Wednesday, Thursday,
Friday, Saturday and Sunday time periods.
A Note About Auto Changeover:
When in Auto you have the ability to switch between auto heat or auto
cool by pressing the system key. This can be done once the current
mode has reached its setpoint. For example: if in auto heat, the heat
setpoint must be satisfied before the thermostat will allow you to switch
to auto cool. You can switch out of auto by holding down the system
key. To get back into auto, you must toggle the system key to auto.
To customize your 7 day Program schedule, follow these steps:
Monday:
1. Select HEAT or COOL with the SYSTEM key.
Note: You have to program heat and cool each separately.
2. Press the Menu button (If menu does not appear first, press
Run Schedule).
3. Press Set Schedule. Note: Monday is displayed and the
WAKE/OCC1 icon is shown. You are now programming the
WAKE/OCC1 time period for that day.
4. Use the
or
key to make your time
selection for that day's WAKE/OCC1 time period.
Note: If you want the fan to run continuously during this time
period, select On with the FAN key. If you want to use IAQ
mode during this time period, select IAQ with the fan key.
5. Then use the
or
that day's WAKE/OCC1 period.
6. Press Next.
7. Repeat steps 4 through 6 for
time period, for
that day's
SLEEP/UNOCC2 time period.
and for
that day's
Repeat steps 4 through 6 for the remaining days of the week.
Programming
key to make your setpoint selection for
LEAVE/UNOCC1
that day's
RETURN/OCC2 time period,
Advertisement
