Summary of Contents for Galvin Specialised Ezy-Drink TD45P
Page 1
Push button Working Pressure Range (kPa) Working Temperature Range (°C) Nominal Flow Rate (LPM) Finish Chrome NOTE: Galvin Specialised continually strive to improve their products. Specifications may change without notice. TOOLS REQUIRED − Power drill − Spanner or adjustable crescent −...
Page 2
TD90P INSTALLATION IMPORTANT: Galvin Specialised products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards. Failing to comply with these provisions shall void the product warranty and may affect the performance of the product.
Page 3
Version 2, 8 June 2017, Page 3 of 4 Blanking screw 3. Testing − Once the drinking tap has been installed and tested for leaks, the water height must be adjusted to suit the available pressure. − To adjust water flow 1.
Page 4
Version 2, 8 June 2017, Page 4 of 4 WARRANTY The warranty set forth herein is given expressly and is the only warranty given by the Galvin Engineering Pty Ltd. With respect to the product, Galvin Engineering Pty Ltd makes no other warranties, express or implied. Galvin Engineering Pty.