Preparing The Charger - Phonak Audeo L-R Series User Manual

3. Preparing the charger

Connecting the power supply
c
a
The Phonak Charger Ease
may be used with an
external power supply
that fulfills the
specifications in the
table below
Power supply and charger Specifications
Power supply input voltage
Power supply output voltage
Charger input voltage
USB cable specifications
12
d
b
100-240 VAC, 50/60 Hz,
current 0.25 A
5 VDC +/-5%, current 1 A
5 VDC +/-5%, current 250 mA
5 V min. 1 A, USB-A to USB-C,
maximum length 3 m
a) Plug the larger end of
the charging cable into
the power supply.
b) Plug the smaller end
into the USB port on
the charger.
c) Plug the power supply
into a power outlet.
d) The indicator light
around the USB port
will light up green
when the charger is
connected to the
power outlet.