Troubleshooting; Technical Specifications - ECG BD 35 Instruction Manual

TROUBLESHOOTING

Problem
The pump does not work
The pump is working, but
it is not dispensing liquid.

TECHNICAL SPECIFICATIONS

It guarantees 100% touch-free operation (reduces presence of bacteria)
Suitable for using with any soap, shampoo, disinfectant gel, cleaning product or liquid body lotion
Automatic hand detection activates the soap dispenser
Three-level setting for the dispensed amount (Low, Medium, High)
Transparent container to show the amount of liquid
Self-cleaning mode
Low battery LED indicator
Easy to refi ll
Wall mounting kit
350 ml capacity
Power: Operates on 3 × AA battery (not included)
USE AND DISPOSAL OF WASTE
Wrapping paper and corrugated paperboard – deliver to scrapyard. Packing foil, PE bags, plastic elements – throw into
plastic recycling containers.
DISPOSAL OF PRODUCTS AT THE END OF LIFETIME
Disposal of electric and electronic equipment (valid in EU member countries and other European
countries with an implemented recycling system)
The represented symbol on the product or package means the product shall not be treated as domestic waste.
Hand over the product to the specifi ed location for recycling electric and electronic equipment. Prevent
negative impacts on human health and the environment by properly recycling your product.
Recycling contributes to preserving natural resources. For more information on the recycling of this product,
refer to your local authority, domestic waste processing organization or store, where you purchased the
product.
This product complies with EU directive requirements on electromagnetic compatibility and
electrical safety.
Changes in text and technical parameters reserved.
Possible cause / solution
• The device is switched off (OFF). Move the switch in the battery
compartment to "Lo" and thus switch the device on.
• Weak or empty batteries. Replace batteries.
• Incorrectly inserted batteries. Insert the batteries observing correct
polarity.
• The dispensing nozzle may be clogged. Remove the obstacle in
the nozzle using a toothpick or something similar. If the function is
not renewed, pour out carefully the liquid from the container, add
partially water, put the plug back in and shake it gently to clean out the
container and the pump chamber. Then use the rinse function several
times, until the dispensing restarts.
08/05
EN
33