Access; How To Log On; Navigation / General Procedures - Panasonic EBL512 G3 Operating Instructions Manual

7. ACCESS

To use the key pad in the control unit and get access to the menus, it is necessary to log in with a user name and a password for
level 2B, 2C or 3A. See section
Before any SSD is downloaded (e.g. in a brand new control unit), only "0" is shown and no password is required. After SSD down-
load, the downloaded user names and passwords are valid.
7.1.

HOW TO LOG ON

a) Open the door. Press the soft key
b) On the keypad, press 0, 1, 2 - - 8 or 9 to select a user. Press
c) Type the password for that user. (Six digits. * * * * * *)
After typing a correct password, a main menu list with the available menus will be displayed.
For "0", Information only, no password is required.
NO ACCESS!
No access will be shown if the password was not correct. Try again.
After three wrong passwords the log in function will be blocked for one hour for the user name respective-
ly.
7.2.

NAVIGATION / GENERAL PROCEDURES

• Scroll in lists or menus with
• Press to toggle between different choices.
• Press soft key
• Press to select / accept.
• Press the digits on the numeric pad to choose a menu or enter data.
• A successful disablement is indicated by a beep and a "√". It will also be shown in the Re-enable list.
• A not successful disablement is indicated by another beep and a "X".
• To leave a menu press ESC.
• To leave the menu system, press the soft key
• To logout, close the door.
Quick jump can be used within each menu, for example press "6" for a quick jump to menu H6.
You will be automatically logged out 15 minutes after the last action, and directly when you close the door. A new login is then
required. If you leave the menu system without closing the door, you have access to the menu system again only by using the soft
key "Menu". A new login is not required.
8.1. USER LEVEL ACCORDING TO EN54-2
.
Menu
.
to toggle between different functions.
on page 23.
.
Escape
.
menu
22