Panasonic EBL512 G3 Operating Instructions Manual page 11

EBL512 G3 V. 3.0.X - FIRE ALARM SOLUTIONS OPERATING INSTRUCTIONS
ADDRESS AND MODE
Most of the addressable units must have both address and mode set. This is done in different ways for different units, for example
address setting tool, DIP switches, jumpers, or via the c.i.e. display. For more information, please read the Technical descriptions for
each unit respectively.
SOFTWARE (S/W) VERSIONS
Due to continual development and improvement, different S/W versions can be found. When installing a new control unit in a system
with "older" control units, you might have to upgrade the S/W in the old control units, or download an older S/W version in the new
control unit. The same S/W version is required in all control units in a network.
EBLWin
The PC program EBLWin is used for programming and commissioning of one or more control units.
TLON Manager
The PC program TLON Manager is used for the TLON Network programming and installation.
APPLICATIONS
The EBL512 G3 system is intended for small, medium, and large installations. The intelligent control units offer the system designer
and end user a technically sophisticated range of facilities and functions.
Programming with the PC programs EBLWin and TLON Manager, and commissioning the system is very easy. Start with one control
unit and later when it is required, add more units. The network boards makes it possible to install the control units in one building or
in different buildings.
11