Hide thumbs Also See for T3110:

Advertisement

Quick Links

T3110 TRANSMITTER
Programmable transmitter of temperature, relative humidity
and other derived humidity values
with 4-20 mA outputs
Instruction Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the T3110 and is the answer not in the manual?

Questions and answers

Summary of Contents for Comet T3110

  • Page 1 T3110 TRANSMITTER Programmable transmitter of temperature, relative humidity and other derived humidity values with 4-20 mA outputs Instruction Manual...
  • Page 2 Instruction manual for use of T3110 transmitter Transmitter is designed for measurement of ambient air temperature at °C or °F and relative humidity of air without aggressive ingredients with computing one of the following values: dew point temperature, absolute humidity, specific humidity, mixing ratio and specific enthalpy.
  • Page 3 Several settings of installed transmitter is possible to verify without a use of the computer. It is necessary to connect at least power of current loop I1. Unscrew the transmitter lid and shortly press button between display and interconnection terminals by means of a tool (e.g. screwdriver). IE-SNC-T3110-05...
  • Page 4 Reading next to this symbol is calculated absolute humidity or error state of value. g/kg Reading next to this symbol is calculated specific humidity or mixing ratio (depends on device setting) or error state of value. If specific enthalpy is selected, there is shown only value (number) without corresponding unit! IE-SNC-T3110-05...
  • Page 5 This value depends on the atmospheric pressure. For computing is used constant value stored inside device memory. Default value preset by manufacturer is 1013hPa and can be changed by user’s software. This maximum is reached under conditions about 70°C/100%RH or 80°C/70%RH IE-SNC-T3110-05...
  • Page 6 • Run installed Tsensor program and select corresponding communication COM port (as described above). • When new setting is saved and finished, disconnect the cable from the device, connect leads into its terminals and place the lid back to the device. IE-SNC-T3110-05...
  • Page 7 3.8 mA. It is a serious error, contact distributor of the instrument. End of operation Device itself (after its life) is necessary to liquidate ecologically! Technical support and service Technical support and service is provided by distributor. For contact see warranty certificate. IE-SNC-T3110-05...
  • Page 8 Notes: IE-SNC-T3110-05...

Table of Contents