Initial Set-Up - Beko B43 A 670 A Brief Instruction

SETTINGS
------------------------------------------------------------------------------------------------------------------

Initial Set-up

Press
1 » 8 « to switch on the TV in standby
mode.
– The »Welcome!« menu will appear when
the TV is switched on for the first time.
Welcome!
Press OK.
After these easy setup steps, you can start using your smart TV.
Help:
If the »Welcome!« menu does not appear
7
on the screen, make the setting by following
the instructions on restoring factory defaults
on page 54.
2 Step-by-step setup will be made to be able
to use the television. Press »OK« to start the
setup.
3 Select the menu language with »
» « or » « and press »OK« to confirm.
V Λ
– Data collection and software update
notification will be displayed.
< >
4 Press »
« or » « to select »Accept« and
press »OK« to confirm. – »Country Selec-
tion« menu will be displayed.
5 Select the country in which the television
set is operated with »
and press »OK« to confirm.
– »Time Setting« menu will be displayed.
6 Confirm »Auto« with »OK«;
or
Use the »Manual« option to enter time and
date, and press »OK« to confirm.
7 Read »Legal Notices« and press »OK« to
proceed to the next step.
Notes:
If you want to connect your TV to home
7
network,
– continue at point 12 for an automatic LAN
Television / User Manual
Enter
OK
< >
«, » «,
< >
«, » «, » « or » «
V Λ
connection, or
– continue at point 16 for an automatic
WLAN connection.
If it is not necessary to connect to a home
7
network, select »Skip« and continue with
the setup from point 22; 26; or 28.
Connecting to a home network with a
LAN cable
8 Press »
« or » « to select »Wired Net-
V Λ
work« and press »OK« to confirm.
– »Privacy Policy« menu will be displayed.
9 To continue, read the Privacy Policy and
< >
press » « or » « to select »Accept« and
press »OK« to confirm.
10 Based on your network provider, press »
» « to select »IPv4« or »IPv6« and press
Λ
»OK« to confirm.
11 Confirm »Auto Input« by pressing »OK«.
Note:
Manual LAN connection settings are on
7
page 61.
12 Network connection will be tested and
network settings will be displayed.
13 To proceed to the next step, confirm »Next«
by pressing »OK«.
14 For Netflix settings, press »Start Netflix«;
or
To proceed to channel search, select »Skip«
and confirm with »OK«.
Note:
If you select »Start Netflix«, the initial setup
7
will be ended. To search for channels, see
the Detailed Channel Settings section on
page 65.
If you select »Skip«, continue searching TV
7
channels:
– point 22 for DVB-S reception;
– point 26 for DVB-C reception;
– point 28 for DVB-T reception.
«,
V
19 / 81 EN