Table of Contents
Advertisement
Available languages
Available languages
NETWORK SETUP
Wireless WPS network connection by
pressing a button
1 Open the menu with »MENU«.
2 Press »
« or »
« to select »Network« and
V
Λ
>
press »
« to confirm.
3 Press »
« or »
« to select »Wireless Net-
V
Λ
work« and press »OK« to confirm.
4 To approve the Privacy Policy, press »
>
»
« to select »Accept« and press »OK« to
confirm.
– »Wi-Fi Network« menu will be displayed.
5 According to your network infrastructure,
press »
« or »
« to select »IPv4« or
V
Λ
»IPv6« and press »OK« to set »On«.
Note:
To access the internet through IPv6, your
7
internet service provider and modem must
support IPv6. If only the modem supports
IPv6, it can only connect to the modem; you
cannot connect to internet.
6 Press »
« or »
« to select »Base Station«
V
Λ
and press »OK« to confirm.
– Wireless networks will be scanned and
displayed in the »WIFI List« menu.
7 Press »
« (blue) for the WPS connection.
8 Press »
« or »
« to select »WPS-PBC«
V
Λ
and press »OK« to confirm.
9 Press the WPS button on the router.
10 After pressing the WPS button on the access
<
point, press »
« or »
and press »OK« to confirm.
11 Press » « (green) to make sure that the
network connection is established with the
current settings.
– »Connecting ... « message will be dis-
played and if the connection is success-
ful, »Connect Success« message will be
displayed.
12 Press »EXIT« to finish the setting.
Television / User Manual
-------------------------------------------------------------------------------------------
<
« or
>
« to select »Continue«
Wireless WPS network connection with
PIN
1 Open the menu with »MENU«.
2 Press »
« or »
« to select »Network« and
V
Λ
>
press »
« to confirm.
3 Press »
« or »
« to select »Wireless Net-
V
Λ
work« and press »OK« to confirm.
4 To approve the Privacy Policy, press »
to select »Accept« and press »OK« to confirm.
– »Wi-Fi Network« menu will be displayed.
5 According to your network infrastructure,
press »
« or »
« to select »IPv4« or
V
Λ
»IPv6« and press »OK« to set »On«.
Note:
To access the internet through IPv6, your
7
internet service provider and modem must
support IPv6. If only the modem supports
IPv6, it can only connect to the modem; you
cannot connect to internet.
6 Press »
« or »
« to select »Base Station«
V
Λ
and press »OK« to confirm.
– Wireless networks will be scanned and
displayed in the »WIFI List« menu.
7 Press »
« (blue) for the WPS connection.
8 Press »
« or »
« to select »WPS-PIN« and
V
Λ
press »OK« to confirm.
– 8-digit pin code is displayed in the wire-
less WPS menu.
Note:
Refer to the manual of your router to find
7
out how the PIN is entered via a PC.
9 Use a computer to enter PIN to the router (e.g.
AVM FRITZ!Box: menu item WLAN Settings...
WPS) and save.
Note:
The 8-digit PIN code must be entered in the
7
modem interface in 2 minutes; otherwise, con-
nection of television with the modem is cut.
10 To approve the saving process, press »
>
»
« to select »Continue« and press »OK«
to confirm.
– »Connecting ... « message will be displayed
and if the connection is successful, »Connect
Success« message will be displayed.
11 Press »EXIT« to finish the setting.
<
>
« or »
«
<
« or
63 / 81 EN
Advertisement
Chapters
Table of Contents
