Replacing Printed Circuit Board - Bernina Deco 330 Manual

Deco 330
1
1
3
Replacing Printed Circuit Board A
2
1
1
To remove:
1 Remove the front cover. (See page 6)
2 Pull out the connectors of printed circuit board F
LCD Harness, Inverter and Touch panel.
3 Remove Screws (5 pieces) 1 and the Printed
circuit board A 2 with the Card guide 3 .
To attach:
4 Follow the above procedure in reverse.
1 Screws (5 pieces)
2 Printed circuit board (A)
Card guide
3
20