Bernina Deco 330 Manual page 131

The Embroidery Params allow you to change the angle of the stitches, fill stitch length, spacing
between rows, running stitch length, row staggers and underpaths. To edit each area, click on the
gray box to edit OR edit the measurements contained within the box. This will cause the preview box
to update and a new image will be generated.
Angle of Lines of Stitches
Expand
MaximumFill Stitch Length
Spacing between rows
Running Stitch Length (traversal between
sections)
Skip last stitch in each row
Stagger rows this many times before repeating
Underpath
When you are happy with your settings, select Apply and Quitfrom the Embroidery Params menu.
Your design is now ready to be saved and embroidered. Click File and Save As. Name your file and
save it as a .dst (Tajima Embroidery File) or other format and save it to a USB stick or memory card.
Increases the angle of the stitches in a counter-
clockwise direction. 0 is horizontal.
Expands the shape before fill stitching to
compensate for gaps between shapes.
The length of each stitch in a row.
Distance between rows of stitches
Length of stitches around the outline of a fill
region used when moving from section to
section.
Skips the last stitch in each row.
How many rows apart the stitches will be before
they fall in the same column position.
Travel inside the shape when moving from
section to section.