Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for BluStream HEX31WPB-TX
Summary of Contents for BluStream HEX31WPB-TX
- Page 1 HEX31WP-TX User Manual RevA5 HEX31WP-TX User Manual...
-
Page 2: Table Of Contents
Loading A Custom EDID recommended in order to protect and extend the life of your equipment. RS-232 Configuration RS-232 Commands 08 - 09 Product Schematic Specification Package Contents Maintenance Installer Notes 12 - 13 www.blustream.com.au www.blustream.co.uk... -
Page 3: Introduction
/ off control via CEC, RS-232 and IR (via compatible HDBaseT™ Receiver / Matrix). The HEX31WP-TX has been designed to work with all Blustream HDBaseT™ Receiver and Matrix solutions, be installed in both UK and European backboxes, and can be powered locally or from compatible Blustream HDBaseT™... - Page 4 RS-232 - 3-pin phoenix connector for RS-232 pass through to / from compatible HDBaseT™ Receiver / Matrix products 12V DC Input - 2-pin phoenix connector to connect to Blustream 12V power supply (supplied) IR Receiver Input - 3-pin phoenix connector to connect to Blustream IR Receiver (phoenix block supplied, IR Receiver not supplied) HDBaseT™...
-
Page 5: Output On/Off Function
= 1: 2400, 2: 4800, 3: 9600, 4: 19200, 5: 38400, 6: 57600 (Default), 7: 115200 a = RS-232 command to be sent You can also disable the RS232ON/OFF command by replacing y:z:a with DISABLE in the above commands. contact support@blustream.co.uk support@blustream.com.au... -
Page 6: Auto Switching
CAT cable is not exceeded. If mounting the wallplate into a counter top, table top, or lecturn, a backbox may not necessarily be required. Please see below technical drawing of the unit for overall and cut-out dimensions: www.blustream.com.au www.blustream.co.uk... -
Page 7: Edid Control
Loading A Custom EDID A custom EDID file can be loaded into the HEX31WP-TX. Some custom EDID’s can be found on Blustream’s website, or use a 3rd party EDID tool to create a custom EDID. To load an EDID onto the HEX31WP-TX complete the following steps: 1) Rename the EDID file to be “EDID.bin”... -
Page 8: Rs-232 Configuration
Some other examples that other control systems deploy include \r or 0D (in hex) • Spaces – Blustream commands do not require space between commands unless specified. There may be some programs that require spacing in order to work. - Page 9 When Not Detecting A Triggering Signal, Automatically Send y Type Of Command a To The Third-party Device Whose Baud Rate Is z RS232ON DISABLE Disable Automatic RS-232 Commands When Detecting Signal RS232OFF DISABLE Disable Automatic RS-232 Commands When Not Detecting Signal contact support@blustream.co.uk support@blustream.com.au...
- Page 10 HEX31WP-TX USER MANUAL www.blustream.com.au www.blustream.co.uk...
-
Page 11: Specification
• 1 x Magnetic Faceplate • 1 x RS-232 to Phoenix Control Cable • 1 x Quick Reference Guide Maintenance Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this unit. contact support@blustream.co.uk support@blustream.com.au... - Page 12 To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling. www.blustream.com.au www.blustream.co.uk...
- Page 13 HEX31WP-TX USER MANUAL contact support@blustream.co.uk support@blustream.com.au...
- Page 14 www.blustream.com.au...
Need help?
Do you have a question about the HEX31WPB-TX and is the answer not in the manual?
Questions and answers