Installing A 2.5-Inch Hard Drive - HP EliteDesk 880 G5 Maintenance And Service Manual

Installing a 2.5-inch hard drive

1. Prepare the computer for disassembly
2. Remove the access panel
3. Install four black-and-blue M3 mounting screws (two on each side of the drive).
NOTE:
When replacing a drive, transfer the four mounting screws from the old drive to the new drive.
44 Chapter 4 Removal and replacement procedures
(Access panel on page
M3 metric mounting screws can be purchased from HP.
(Preparation for disassembly on page
18)
17)