Table of Contents
Advertisement
Quick Links
INSTALLER: Leave this manual with party responsible for use and operation.
OWNER: Retain this manual for future reference.
Contact your dealer with questions on installation, operation, or service.
NOTICE: DO NOT DISCARD THIS MANUAL
4300 WOOD APPLIANCE SERIES
AUTOMATIC COMBUSTION CONTROL
MODELS:
43M-ACC-MBK
43ST-ACC-B
Installation and service of this appliance should be performed by
qualified personnel. Hearth & Home Technologies recommends
HHT Factory Trained or NFI certified professionals.
1
Owner's Manual
Operation & Care
(ACC)
If the information in these instructions is
not followed exactly, a fire could result
causing property damage, personal injury,
or death.
•
Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any other
appliance.
•
Do not over-fire - If appliance or chimney connector
glows, you are over-firing. Over-firing will void your
warranty.
•
Comply with all minimum clearances to combustibles
as specified. Failure to comply may cause house fire.
HOT SURFACES!
Glass and other surfaces are hot during
operation AND cool down.
Hot glass and appliance will cause burns.
•
Do not touch glass until it is cooled
•
Use leather gloves when reloading fuel
•
NEVER allow children to touch glass
•
Keep children away
•
CAREFULLY SUPERVISE children in same room as
appliance.
•
Alert children and adults to hazards of high
temperatures
•
High temperatures may ignite clothing or other
flammable materials.
•
Keep clothing, furniture, draperies and other
flammable materials away.
Fire Risk.
For use with solid wood fuel only.
Other fuels may over-fire and generate
poisonous gases (i.e. carbon monoxide).
To obtain a French translation of this manual, please
contact your dealer or visit
Pour obtenir une traduction française de ce manuel, s'il
vous plaît contacter votre revendeur ou visitez
www.quadrafire.com
7037-171E
WARNING
WARNING
WARNING
NOTE
www.quadrafire.com
August 13, 2018
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Quadra-Fire 43ST-ACC-B
Summary of Contents for Quadra-Fire 43ST-ACC-B
- Page 1 Over-firing will void your 43M-ACC-MBK warranty. • Comply with all minimum clearances to combustibles 43ST-ACC-B as specified. Failure to comply may cause house fire. WARNING HOT SURFACES! Glass and other surfaces are hot during operation AND cool down.
-
Page 2: Sample Of Serial Number / Safety Label
4300 Wood Stove Series ACC NOTE: Clearances may only be reduced by means approved by the regulatory authority having jurisdiction A. Sample of Serial Number / Safety Label LOCATION: Back of appliance ITEM PART NUMBER PART NAME 7037-136 SERIAL RATING PLATE CAUTION HOT WHILE IN OPERATION DO NOT TOUCH, KEEP CHILDREN AND CLOTHING AWAY. -
Page 3: Table Of Contents
E. Using Burn Rate Air Control & ACC System ..11 C. 43ST-ACC-B ......32 F. -
Page 4: Warranty Policy
4300 Wood Stove Series ACC B. Warranty Policy Hearth & Home Technologies LIMITED LIFETIME WARRANTY Hearth & Home Technologies, on behalf of its hearth brands (“HHT”), extends the following warranty for HHT gas, wood, pellet and electric hearth appliances that are purchased from an HHT authorized dealer. WARRANTY COVERAGE: WARRANTY PERIOD: distributor, whichever occurs earlier. - Page 5 4300 Wood Stove Series ACC WARRANTY CONDITIONS: • This warranty only covers HHT appliances that are purchased through an HHT authorized dealer or distributor. A list of HHT authorized dealers is available on the HHT branded websites. • • This warranty is only valid in the country in which the HHT authorized dealer or distributor that sold the appliance resides. •...
- Page 6 4300 Wood Stove Series ACC This warranty is void if: • • • There is any damage to the appliance or other components due to water or weather damage which is the result of, but not limited LIMITATIONS OF LIABILITY •...
-
Page 7: Quick Start Guide
4300 Wood Stove Series ACC C. Quick Start Guide Note: These are generic drawings and may not represent your specific model. 10 Pieces of Newspaper, 10-20 Pieces of Dry Kindling ITEMS NEEDED FOR FIRST FIRE: and a Few Pieces of Dry Split Wood. OPEN AIR LOAD WOOD ADD NEWSPAPER... -
Page 8: Listing And Code Approvals
NOTE: This installation must conform with local codes. In the absence of local codes you must comply with (UM) 84-HUD and NFPA211 in the U.S.A. and CAN/CSA-B365 Installation Codes in Canada. The Quadra-Fire 4300 ACC Series Wood Appliance meets the U.S. Environmental Protection Agency’s crib wood emission limits for wood appliances sold after May 15, 2015. -
Page 9: Glass Specifications
4300 Wood Stove Series ACC C. Glass Specifications WARNING This appliance is equipped with 5mm ceramic glass. Replace glass only with 5mm ceramic glass. Please Fire Risk. contact your dealer for replacement glass. Hearth & Home Technologies disclaims any D. Mobile Home Approved responsibility for, and the warranty will be voided •... -
Page 10: Operating Instructions
• Roaring, rumbling noises placed on the burning of wood for home heating. In order • Loud cracking or banging sounds to improve the situation, we at Quadra-Fire have developed • Metal warping cleaner-burning wood appliances that surpass the •... -
Page 11: Air Controls
4300 Wood Stove Series ACC 2. Second Stage E. Using Burn Rate Air Control & ACC System The next stage of burning, the secondary stage, is the 1. Start up and Reloading Fuel period when the wood gives off flammable gases which Open both Burn Rate Air Control and ACC systems fully. -
Page 12: Burn Rates And Operating Efficiency
4300 Wood Stove Series ACC F. Burn Rates and Operating Efficiency WARNING For maximum operating efficiency This wood appliance has a manufacturer-set minimum Risk of Fire. low burn rate that must not be altered. It is against federal When set on High Burn Rate and over-riding the regulations to alter this setting or otherwise operate this Automatic Combustion Control system an over fire wood appliance in a manner inconsistent with operating... -
Page 13: Building A Fire
4300 Wood Stove Series ACC G. Building A Fire NOTE: Before lighting your first fire in the appliance: • Build fire on brick firebox floor. NOTE: The special high temperature paint that your • Do NOT use grates, andirons or other methods to appliance is finished with will cure as your support fuel. -
Page 14: Correct Baffle & Blanket Placement
4300 Wood Stove Series ACC INCORRECT POSITIONS H. Correct Baffle & Blanket Placement WARNING Fire Risk. Firebox damage due to improper baffle placement is not covered by warranty. Operate the wood burning appliance with the baffle in the correct position only. Not doing so could result in: •... -
Page 15: Blower Operating Instructions
4300 Wood Stove Series ACC I. Blower Operating Instructions J. Opacity (Smoke) NOTE: If your Quadra-Fire wood appliance is equipped This is the measure of how cleanly your appliance is with an optional blower, you should follow these burning. Opacity is measured in percent; 100% opacity is... -
Page 16: Clear Space
4300 Wood Stove Series ACC K. Clear Space L. Negative Pressure • Do NOT place combustible objects within 4 ft (1.2 m) of WARNING the front of appliance (Figure 16.1). • Mantel - avoid placing candles and other heat-sensitive Asphyxiation Risk. objects on mantel or hearth. -
Page 17: Frequently Asked Questions
4300 Wood Stove Series ACC M. Frequently Asked Questions ISSUES SOLUTIONS When first operated, this appliance may release an odor for the first several hours. This is Odor from appliance caused by the curing of the paint and the burning off of any oils remaining from manufacturing. Noise is caused by metal expanding and contracting as it heats up and cools down, similar to Metallic noise the sound produced by a furnace or heating duct. -
Page 18: Maintenance And Service
4300 Wood Stove Series ACC Maintenance and Service A. Quick Reference Maintenance Guide CAUTION! Allow the appliance to completely cool down before performing any cleaning or maintenance. When properly maintained, your fireplace will give Start the first inspection after the first 2 months of use, you many years of trouble-free service. -
Page 19: Cleaning And Operating The Ash Removal System
4300 Wood Stove Series ACC B. Cleaning and Operating the Ash Removal System WARNING Fire Risk. Make sure Ash Removal System door is sealed tight against the gasket. Air leakage may cause: • Over-fire condition • Flame and/or smoke spillage •... - Page 20 4300 Wood Stove Series ACC Formation and Need For Removal: When wood is burned 3. Disposal of Ashes • Frequency: When ash is within 1-3/4 in. (44mm) of slowly, it produces tar and other organic vapors which combine with expelled moisture to form creosote. firebox lip •...
-
Page 21: Troubleshooting Guide
4300 Wood Stove Series ACC Troubleshooting Guide With proper installation, operation, and maintenance your wood appliance will provide years of trouble-free service. If you do experience a problem, this troubleshooting guide will assist you or a qualified service person in the diagnosis of a problem and the corrective action to be taken. -
Page 22: Service Part Replacement
9. Replace the door on the appliance. 2. A magnet holds the bracket to the appliance. Pull the bracket down away from the appliance to expose the Quadra-Fire appliances are equipped with ceramic super snap disc. heat-resistant glass, which can only be broken by impact or 3. -
Page 23: Door Handle Assembly
4300 Wood Stove Series ACC D. Door Handle Assembly 1. Slide door handle through door. 2. Install additional washer(s) as shown in Figure 23.1 3. Install key in groove. 4. Align groove in latch cam with key; slide latch cam over shaft 5. -
Page 24: Tube Channel Assembly Replacement
4300 Wood Stove Series ACC F. Tube Channel Assembly Replacement Removing Tube Channel Assembly 1. Remove the right side shield by removing 2 screws in the back using a Phillips head screw driver. 2. Remove 4 screws from channel access cover and remove cover. -
Page 25: Reference Materials
4300 Wood Stove Series ACC Reference Materials A. Service & Maintenance Log Date of Service Performed By Description of Service August 13, 2018 7037-171E... - Page 26 4300 Wood Stove Series ACC Date of Service Performed By Description of Service 7037-171E August 13, 2018...
-
Page 27: Acc
4300 Wood Stove Series ACC B. 43M-ACC 43M-ACC Service Parts Wood Stove Beginning Manufacturing Date: Oct. 2006 Ending Manufacturing Date: Active 43M-ACC-MBK 43M-ACC-GT Oct. 2006 - Jan. 2007, 43M-ACC-NT Oct. 2006 - Jan. 2007 Part number list on following page. 08/18 August 13, 2018 7037-171E... - Page 28 4300 Wood Stove Series ACC 43M-ACC Service Parts Beginning Manufacturing Date: Oct. 2006 Ending Manufacturing Date: Active IMPORTANT: THIS IS DATED INFORMATION . Parts must be ordered from a dealer or Stocked Hearth and Home Technologies does not sell directly to consumers distributor.
- Page 29 4300 Wood Stove Series ACC 43M-ACC Service Parts Beginning Manufacturing Date: Oct. 2006 Ending Manufacturing Date: Active #16 Brick Set Assembly #17 Pedestal Assembly 16.1 16.1 16.1 16.1 17.1 16.5 16.1 16.1 16.1 16.1 16.1 16.1 16.1 17.2 16.1 16.4 16.5 16.2 16.2 16.2...
- Page 30 Qty. 7 Ft. Req. 832-1680 436-5350 Black & Gold Doors Component Pack (Spring Handles (1) 1/2” & (2) 1/4”, (2) Gold Hinge Pins, Quadra-Fire Logo 436-5360 Nickel doors Upgrade, Door, Nickel - Nickel Handles, Hinge Pins & Logo UK-DRNL Additional service part numbers appear on following page.
- Page 31 Component Pack Nickel 7037-015 Blower, Convection - Replacement Blower 812-4900 Gasket, Manifold Pkg of 4 7038-168/4 Gold 200-3180 Logo, Quadra-Fire Nickel 200-3240 Paint Touch-Up Black 812-0910 Outside Air Kit, Floor & Rear OAK-ACC Outside Air Collar Assembly 7033-039 Outside Air Shield...
-
Page 32: 43St-Acc-B
4300 Wood Stove Series ACC C. 43ST-ACC-B 43ST-ACC-B Service Parts Beginning Manufacturing Date: Sept 2016 Step Top Model - Wood Stove Ending Manufacturing Date: Active Part number list on following page. 08/18 7037-171E August 13, 2018... - Page 33 4300 Wood Stove Series ACC 43ST-ACC-B Service Parts Beginning Manufacturing Date: Sept 2016 Ending Manufacturing Date: Active IMPORTANT: THIS IS DATED INFORMATION . Parts must be ordered from a dealer or Stocked Hearth and Home Technologies does not sell directly to consumers distributor.
- Page 34 4300 Wood Stove Series ACC 43ST-ACC-B Service Parts Beginning Manufacturing Date: Sept 2016 Ending Manufacturing Date: Active #4 Brick Assembly Set #20 Burn Rate Controls & Associated Parts 20.1 20.10 20.9 20.2 4.2 4.2 4.2 4.2 9 in. 20.3 7-1/4 in.
- Page 35 4300 Wood Stove Series ACC 43ST-ACC-B Service Parts Beginning Manufacturing Date: Sept 2016 Ending Manufacturing Date: Active #21 Leg, Ash Pan and Pedestal Assembly 21.1 21.4 21.5 21.3 21.2 IMPORTANT: THIS IS DATED INFORMATION . Parts must be ordered from a dealer or...
- Page 36 226-0100/24 Door Handle, Formed SRV430-1131 436-5350 Black & Gold Doors Component Pack (Spring Handles (1) 1/2” & (2) 1/4”, (2) Gold Hinge Pins, Quadra-Fire Logo 436-5360 Nickel Door Additional service part numbers appear on following page. 7037-171E August 13, 2018...
- Page 37 Channel, Ash Removal 7033-172 Component Pack 7033-051 Door Handle Assembly 832-0540 Gasket, Manifold Pkg of 4 7038-168/4 Logo, Quadra-Fire, Black Pkg of 10 7000-694/10 Outside Air Collar Assembly 7033-039 Outside Air Kit, Floor & Rear OAK-ACC Outside Air Shield SRV33271...
- Page 38 Hearth & Home Technologies 352 Mountain House Road Halifax, PA 17032 Division of HNI INDUSTRIES Please contact your Quadra-Fire dealer with any questions or concerns. For the number of your nearest Quadra-Fire dealer log onto www.quadrafire.com CAUTION DO NOT DISCARD THIS MANUAL...
Need help?
Do you have a question about the 43ST-ACC-B and is the answer not in the manual?
Questions and answers