SERVSWITCH™ JR.
Appendix A: NVRAM Factory Defaults
The table below shows, for the ServSwitch Jr.'s saveable options, the default values
stored in nonvolatile memory (NVRAM) when the Switch is shipped from the
factory. It also shows what commands or actions can change these settings for the
Switch's current operating period, as well as what commands or actions can save
changed settings to NVRAM, so that they become the new defaults.
Option
Factory-Default
Setting
Caps/Scroll/
Num Lock ON (fixed)
Num Lock
Scan
OFF
Scan-Delay
5 seconds
Time
Maximum
SW622A-R2: Four
Ports
SW629A-R2: Eight
Keyboard
Mode 2
Mode
Keyboard
43 (delay of 1/2 second,
Typematic
PS/2 to RS-232
0 (OFF) for each computer
Mouse
Translation
40
rate of 10.9 characters
per second)
To Change
Select port, then press the
corresponding button on the
keyboard
Type [Ctrl] S (to turn ON) or
[Ctrl] X (to turn OFF)
Type [Ctrl] Txx [ENTER]
(xx = 1 to 15, time in seconds)
Type [Ctrl] Px [ENTER]
(x = 2 to 7)
Select port, then type [Ctrl] Mx
(x = 1, 2, or 3)
Type [Ctrl] Axxx [ENTER]
(xxx = 0 to 127; see
Section 4.3.12)
Select port, then type
[Ctrl] 1 [ENTER] to turn ON or
[Ctrl] 0 [ENTER] to turn OFF
To Save
Changes
Can't be saved
Can't be saved
[Ctrl] K
[Ctrl] K
[Ctrl] K
[Ctrl] K
[Ctrl] K