Table of Contents
Advertisement
SERVSWITCH™ JR.
• Front-panel LEDs show which CPU is selected.
• The units remember and restore Num Lock, Caps Lock, Scroll Lock, and
keyboard mode for each CPU.
• Scan function can sequence between CPUs every 1 to 15 seconds.
• Screen-save function can turn off video after 1 to 999 seconds of inactivity.
• You can program the keyboard's typematic rate and delay.
• Custom settings for each CPU can be saved in nonvolatile memory.
• Rackmount kits are also available.
2.3 The Front Panel
The ServSwitch Jr.'s front panel features a number of LED indicators and port-
selection controls. To familiarize yourself with these, refer to Figure 2-1 below and
the descriptions that follow for 2- or 4-port models, or refer to Figure 2-2 on the
next page and the descriptions that follow for 8-port models.
®
BLACK BOX
724-746-5500
POWER
Figure 2-1. The front panel of a 4-port ServSwitch Jr. (SW622A-R2).
Panel Label
POWER
[Numbered
LEDs]
RESET
[Numbered
Switches]
12
R
1
2
3
4
RESET
Description
Power LED: Lights to indicate that the Switch is receiving
power.
Port-Selection LEDs: Light if the corresponding port is
currently selected.
Reset Switch: Press this membrane switch to reset the unit and
reinitialize the shared keyboard and mouse; also used to
restore the unit to its factory-default state.
Port-Selection Switches: Press any of these membrane switches
to select the corresponding CPU.
1
2
3
4
Advertisement
Table of Contents
