Table of Contents
Advertisement
8
4
Figure 2-4. The rear panel of an 8-port ServSwitch Jr. (SW629A-R2).
Panel Label
Connector
[Numbered
DB25 F
Ports]
(VGA
HD15 F
MONITOR)
(PS/2
6-pin mini-
DIN F
MOUSE)
(PS/2
6-pin mini-
KEYBOARD)
DIN F
Optional
3.5-mm
5V DC
barrel jack
7
6
3
2
Description
Connect the sharing computers to these ports with
special "CPU Adapter Cables." At the Switch end,
these cables have a DB25 male connector; at the
other ends, they have appropriate connectors to
plug into your CPUs' video, keyboard, and mouse
ports. These cables take the signals that would
normally be carried between the CPUs' ports and
the monitor, keyboard, and mouse, and carry them
between the CPUs' ports and the ServSwitch Jr.
instead.
Attach the shared monitor's video cable directly to
this port.
Attach your regular PS/2 or PS/2 wheel type mouse
directly to this port.
Attach your PS/2 type keyboard directly to this port.
If you want to give the Switch more power than the
attached CPUs can provide, plug the output cord of
the optional PS255 external power supply into this
jack.
CHAPTER 2: Introduction
5
1
Optional 5V DC
15
Advertisement
Table of Contents
