Fast Preheat; Max Cook - Thermador PODC302 Use And Care Manual

Fast Preheat

Max Cook

Fast Preheat heats the oven quicker than standard preheat. It is available for Bake,
Convection Bake, Roast, Convection Roast and True Convection modes.
To set Fast Preheat:
1. Set the cooking mode and temperature.
2. Press FAST PREHEAT.
The flash icon appears in the display:
Fast Preheat can be used for both ovens. The flash on the top part of the display
represents the upper oven, and the flash on the lower part of the display represents
the lower oven. Press FAST PREHEAT until the flash appears for the desired oven.
Fast Preheat stays on until all preheat monitor bars are visible. Then the flash icon
disappears.
Note:
• To use Fast Preheat, the temperature must be set to at least 200 ºF.
• Fast Preheat can also be activated when the oven is already operating and the
programmed temperature has not yet been reached.
• Fast Preheat remains on even if you switch to a different cooking mode after
starting Fast Preheat. If Fast Preheat is not available for the new mode, stan-
dard preheat is activated and the flash symbol disappears.
The Max feature increases the area heated by the upper element. Use the Max fea-
ture to prepare large amounts of food at the same time. For best results, use the
broil pan included with the appliance.
Max Cook is available for the upper oven in Broil and Convection Broil.
Press +MAX to turn Max Cook on and off.
17