Daily Use - Drying (Only); Daily Use - Washing & Drying (Non-Stop Program); Washing Program + "Dryness Level" Option - Electrolux EWW1042R7MB User Manual

24
www.electrolux.com
24 www.electrolux.co.th

DAILY USE - DRYING (Only)

6.
1. Press the On/Off button to turn on the
machine.
2. Load the laundry. Make sure the load
size does not exceed the maximum
drying capacity of the machine.
3.
Turn the knob to set a wash program
which can select drying option (refer to
Program Chart on page 12), according
to your clothes then press Wash/Dry
Mode touchpad to switch your
machine to Dry Only (
4. If you wish to select an automatic
drying, press the "Dryness Level"
option until the icon corresponding to
the required dryness level appears on
the display. (see page 16)
5.
If you wish to select a timed drying,
press the "Time Dry" option
repeatedly until desired drying time
reached. (see page 17)
6. Press "Start/Pause
start the program. The time remaining
is updated every minute.
7. DAILY USE - WASHING & DRYING (Non-Stop Program)

7.1 Washing Program + "Dryness Level" Option

1.
Load the laundry and add detergent
and fabric softener. Make sure the load
size does not exceed the maximum
drying capacity of the machine.
2. Turn the knob to set a wash program
which can select drying option (refer to
Program Chart on page 12), according
to your clothes then press Wash/Dry
Mode touchpad to switch your machine
to Wash and Dry (
3.
Select the required options by
pressing the relevant touchpads. If
possible, do not select a spin speed
lower than that proposed by the
machine to avoid unnecessary longer
drying time therefore saving energy.
The water tap must be open
and the drain hose must be
positioned in the sink or
connected to the drain pipe.
" touchpad to
/
7.
) mode.
8.
9.
4.
5.
) mode.
At the end of the program :
-
The acoustic signal will operate.
-
The display will show "
"Anticrease ( )" icon is lit.
-
The door lock indicator "
on.
-
The appliance will perform the anti-
crease phase for approximately 10
minutes.
After anticrease phase finish, the
door lock indicator "
The display will show "
If you wish to open the door
during the anticrease phase
or interrupt it, press
Start/Pause touchpad.
Press "On/Off" button to switch the
machine off.
At the end of each drying cycle,
the temperature of your clothing
will be high. For your safety,
please leave the door open to
let your clothes cool before
removing your laundry.
Set the dryness level by pressing
"Dryness Level" touchpad.
The display will then show the whole
duration of wash & dry cycle.
If a program is not compatible
with the drying option selected,
the symbol "
display.
Start the program by pressing
Start/Pause touchpad. The time
remaining is updated every minute on
the display.
" and
" is still
" goes off.
".
" will flash on