Daily Use - Drying Only - Electrolux Husqvarna QW 16850 HT User Manual

Table of Contents

Advertisement

22
www.husqvarna-electrolux.se
The appliance drains the water and
spins.
3. When the programme is completed
and the door lock indicator
off, you can open the door .
4. Press AV/PÅ some seconds to
deactivate the appliance.
The appliance drains and
spins automatically after
approximately18 hours.
9.16 AUTO Stand-by option
The AUTO Stand-by option automatically
deactivates the appliance to decrease
the energy consumption when:

10. DAILY USE - DRYING ONLY

WARNING!
Refer to Safety chapters.
10.1 Preparation to drying
1. Press button AV/PÅ for some
seconds to activate the appliance
2. Load the laundry one item at a time.
3. Turn the programme dial to the
drying programme applicable for the
items to dry.
The display shows a minimum time value
and the following symbols:
The drying symbol comes on.
The anti-crease symbol comes on.
The drying time symbol comes on.
When drying a big amount
of laundry, to have good
drying performances, make
sure that the laundry itself is
not rolled up and that is
uniformly distributed in the
drum.
• You do not use the appliance for 5
minutes before you press Start/Paus
button.
Press the button AV/PÅ to activate
goes
the appliance again.
• After 5 minutes from the end of the
washing programme
Press the button AV/PÅ to activate
the appliance again.
The display shows the end of the last
set programme.
Turn the programme knob to set a
new cycle.
To have best performances
in drying when you wash the
laundry set a spin cycle at
the maximum speed allowed
for your type of items.
You can dry your laundry in two ways:
10.2 Automatic drying
1. Press button Torktid repeatedly until
a black line appears under one of the
dryness level symbol:
Extra dry level
Cupboard dry level
Iron dry level
The drying time symbol goes off
The display shows a time value,
calculated on a default load size. If the
amount of your laundry is more or less
than the default size, the appliance
adjusts automatically the time value
during the cycle.
2. Press button Start/Paus to start the
programme. In the display:

Advertisement

Table of Contents
loading

Table of Contents