Daily Use - Drying Only - Electrolux EW7W4316DB User Manual

Table of Contents

Advertisement

34
www.electrolux.com
b.
synthetic items;
c.
The time value on the display is the
duration of both cycles washing and
drying, calculated on a default load
size.
To have a good drying by
using less energy and in a
shorter time, the appliance
does not let you set a too
low spin speed for the items
to be washed and dried.
2. Touch button Départ/Pause
start the programme. The SensiCare
estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.
13.3 Washing and Timed
Drying
1. Tap on the Minuterie button
repeatedly to set the desired time
value (see the "Timed drying" table
the "Programmes" chapter). The
drying level indicator
the indicator
Each time you tap on this button the time
value increases by 5 minutes. The
display shows the set new time value.
2. Touch the Départ/Pause
to start the programme. The
SensiCare estimation starts.
In the display the door locked
indicator comes on.
The display also shows the remaining
programme time.

14. DAILY USE - DRYING ONLY

WARNING!
Refer to Safety chapters.
This appliance is an
automatic washer dryer.
Cupboard dry: for cotton and
Extra dry: for cotton items.
goes off and
comes on.
13.4 At the end of the drying
programme
• The appliance stops automatically.
• The acoustic signals operate (if they
are active).
• In the display
• The indicator of the Départ/Pause
button
The appliance continues to operate
with the anti-crease phase for
approximately 30 minutes or more if
Anti-crease option was set.
to
The anti-crease phase reduces
creasing.
You can remove the laundry before
the anti-crease phase is completed.
We recommend, for better results,
that you remove the laundry when the
phase is almost completed or
completed. The indicator
lit.
• Press the Marche/Arrêt button for
some seconds to deactivate the
appliance.
1. Remove the laundry from the
appliance.
2. Make sure that the drum is empty.
button
14.1 Preparation to drying
1. Press the Marche/Arrêt button for
some seconds to activate the
appliance.
2. Load the laundry one item at a time.
3. Turn the programme dial to the
programme suitable for the items to
dry. The appliance defaults to the
comes on.
goes off. The door locked
goes off.
After some minutes from
the end of the
programme, the energy
saving function
deactivates the appliance
automatically.
After drying phase, clean the
drum, the seal and the inside
of the door with a wet cloth.
remains

Advertisement

Table of Contents
loading

Table of Contents