Electrolux EWW1042R7MB User Manual page 15

No Spin ( )
No spin option eliminates all the spin
phases and increase the number of
rinses.
Rinse Hold ( )
By selecting this option the water of
the last rinse is not emptied out and
the drum turns regularly to prevent the
laundry creases.
The door is still locked to indicate that
the water must be emptied out.
The door stays locked with the
water in the drum. To continue
the cycle, you must press
(Start/Pause).
(
Select "
the sensors for the dirt and detergent
residue.
When using this option, machine will
automatically check the dirt level and
detergent residue* in your laundry. It will
automatically adjust the washing time
and numbers of rinses according to the
load to make sure that your clothes are
really clean.
* Only for liquid detergent
The SensorWash technology consist of 2
different sensors for detection:
st
1) The 1 Turbidity sensor detects the
dirt level at the start of cycle and
automatically calculates the actual
time needed to remove the level of
dirt in the wash; from low dirt levels
all the way to the maximum dirt level.
The initial time displayed on
the control panel indicates the
time needed for the maximum
dirt level.
nd
2) The 2 Conductivity sensor will check
the amount of detergent residue after
the first rinse and the machine will
calculate the optimum number of
rinses (Maximum of 2 additional
rinses) needed to make sure that the
detergent residue is properly removed.
Please see details of detergent
usage at "Detergents Type and
Quantity of Detergent"
15
ENGLISH
) Touchpad
" option to turn ON