Hans Grohe Starck 10715 1 Series Installation/User Instructions/Warranty page 12

English
Axor Massaud only
1
(1) Install the safety set so that it is oriented as shown
in the diagram. Install the sleeve.
Install the escutcheon. Make sure that the notch is at
the bottom of the escutcheon.
2
(2) Install the handle adapter and screw. Tighten the
screw using a 3 mm Allen wrench.
!
(3) Install the handle so that the safety stop override
3
button is at the 12:00 position. Tighten the handle
screw using a 2 mm Allen wrench.
Axor Urquiola only
Place a dab of waterproof sealant at the grout joints.
Install the sleeve with the index mark at the 12:00
position.
Install the escutcheon.
12