Technical Specification; Environmental Protection (Disposal); Warranty And Technical Support - Pro LR-500H User Manual

TECHNICAL SPECIFICATION

Laser source:
Power:
Precision in horizontal plane:
Vertical plane:
Radius of the operating area:
Working range:
Rotating speed:
Range of self-leveling:
Power supply:
Working time:
Protection class:
Dimensions:
Weight (incl. batteries):
Angle of the level:
Working temperature:
For setup on the floor and operation of the laser vertically, attach the bracket with its opening on
the inside. The plate is set in the axis with the laser spot and can be placed on the floor, which can
make laser setup easier.
SAFETY OF USE
- Do not look directly at the source of the laser beam due to the risk of sight damage.
Therefore, do not position the instrument on the level of human eyes.
- Before use. After transport and following a drop or impact, check if instrument settings
are not changed. The user is fully responsible for accuracy of operation, therefore, remember about
regular functional checks. The checking procedure is described in the "Checking" section.
- Handling the instrument. The instrument is a precision device and should be handled with care.
Protect it against vibrations, fall and impacts. For transport always use the plastic case.
Use and store in temperatures provided in the technical specifications. Although the laser is
water-tight, try to keep it dry. Should the device get wet, do not store it in the case - let it dry first.
If the instrument is not going to be used for more than 30 days, remove the batteries both from
the laser and accessories. For cleaning use a soft and dry cloth.

ENVIRONMENTAL PROTECTION (DISPOSAL)

The device should be subjected to appropriate disposal processes. For this purpose, the used device
should be disposed of at a special collection point for this type of waste. For more information, contact
PRO sp. z o.o. representative or the local authorities responsible for waste management.

WARRANTY AND TECHNICAL SUPPORT

For warranty purposes and service support, please contact your
local dealer.
The PRO guarantee for batteries and chargers is 6 months from
the date of purchase. After that period, users can order post-
guarantee service.
8 ver. 2.1
semiconductor diode = 635 nm
< 1 mW class II M
±1,0 mm / 10 m (±0,1 mm / 1 m); ±20"
±1,0 mm / 1,5 m
250 m
500 m (diameter)
0 - 60 -120 - 300 - 600
±5°
NI-MH rechargeable battery
approx. 20 h
IP54
160 mm × 160 mm × 185 mm
3,0 kg
360°
-20°C ÷ 50°C
THE KIT INCLUDES:
- LR-500H laser
- transport case
- laser Glasses
- NI-MH rechargeable battery
- charger
- laser receiver (detector)
with a holder
- reflective target plate
- alcaline battery basket
- user manual.
WALL-MOUNT BRACKET
/ FLOOR PLATE
If the laser is to be suspended
on a wall, attach the mount bracket
with its opening on the outside
to the instrument side wall.
PRO sp. z o.o.
ul. Strażacka 76
43-382 Bielsko-Biała, POLAND
tel. +48 33 818 39 09
NIP 644-14-23-158
www.firma-pro.com