Angelo Decor Countryside Cascade AD97040 Quick Start Manual

Available languages

Countryside Cascade™ Fountain

We hope you will find these instructions helpful in setting up your product.

If you have any issues with this item, DO NOT return the unit to place of purchase.

Please visit our web site www.angelodecor.com for assistance and warranty information.

Carefully unpack and arrange all parts in your

workspace.

Carefully tilt, and retrieve the cord from the base.

Align the power cord with the groove and pull out

excess as needed.

Install the pump cover as shown above.

Fill with clean water and plug into a grounded GFCI outlet.

The pump must be fully submersed at all times to avoid pump burnout.

Product must be properly stored for winter.

Pass the cord from the pump into the main

reservoir and out the small opening at the back.

Locate and connect the pre-installed tubing to

the pump. The pump is set to full strength,

The final assembly

should look like this

AD97040

adjust as needed.

Table of Contents

Need help?

Do you have a question about the Countryside Cascade AD97040 and is the answer not in the manual?

Page 1 Countryside Cascade™ Fountain AD97040 We hope you will find these instructions helpful in setting up your product. If you have any issues with this item, DO NOT return the unit to place of purchase. Please visit our web site www.angelodecor.com for assistance and warranty information. Carefully unpack and arrange all parts in your Pass the cord from the pump into the main workspace.
Page 2 Fontaine Countryside Cascade™ AD97040 Nous espérons que vous trouverez ces instructions utiles en assemblant votre produit. Si vous avez n'importe quelles issues avec cet article, ne renvoyez pas l'unité à l'endroit de l'achat. Veuillez visiter notre site Web www.angelodecor.com pour l'information d'aide et de garantie. Déballez soigneusement et organiser toutes les Faites passer le cordon de la pompe dans le pièces dans votre espace de travail.