Angelo Decor Robins AD97001 Instructions

If you have any issues with this item, please DO NOT return the unit to place of purchase.
Please visit our web site, www.angelodecor.com, for assistance and warranty information.
First unpack carton carefully, arranging parts safely in your working area.
Feed the cord through the
.
cord pipe
Twist and lock bowl to base.
Be sure it sits flat inside the
housing without any kink in the
hose.
We recommend keeping bowl 3/4 full of water to avoid pump burnout.
Thank you for buying an Angelo Décor Fountain!
We hope you will find these instructions helpful in setting up your fountain.
Pass the cord through
the bowl.
Pump is preset to full, adjust lower
if less splash is desired.
Twist and Lock the
top into place
The final assembly
should look like this
Now simply fill with clean water and plug into a grounded GFCI outlet
Product must be properly stored for winter.
Robins Fountain
Pass the cord down the pedestal,
and align with groove at the base.
Connect the tubing to the pump.
AD97001