Alert Sounds - Motorola MOTO BUDS 065 Quick Start Manual

Factory reset
1. In standby mode, press and hold both MFB buttons
for 10 seconds.
2. Put both earbuds into the charging case and the
factory reset is done.
3. Follow pairing instructions in section 3 to do pairing
again.
6.

Alert sounds

The earbuds play an alert sound when performing the
following functions:
• Ready for pairing
• Connected to Bluetooth
• Powering off the earbuds
• Low battery level
• Rejecting a call
• Receiving an incoming call
For a full explanation of all features and instructions,
please download the user guide from motorolasound.
com.
7