Motorola MOTO BUDS 065 Quick Start Manual page 4

2. Charge
Fig.2a
• Fig.2a: Remove all the tapes on the earbuds before
charging.
• Fig.2b: Plug the Type C cable into the USB-C charging
socket of the charging case. The LED indicator flashes
blue during charging the battery. It turns solid blue
when charging is complete.
• Fig.2c: Put the earbuds into the charging case and
close the top lid to start charging.
Fully charge before use
The device can be powered through a USB-C from
any CE compliant power source that implement the
European interface as requested by EN 301 489-52 or
standard national approved USB-C power supply.
3. On/Off/Pair
1. Turn on earbuds: Open the charging case top lid and
take out the earbuds from the charging case, the
earbuds will turn on automatically. (Read section 7)
2. Turn off earbuds: Put the earbuds into the charging
case and close the top lid, the earbuds will be off
automatically.
4
100% <100%
Fig.2b Fig.2c